nsDS5Flags
This attribute allows you to specify replica properties you will have previously
defined in flags. At present only one flag exists, which allows you to specify
whether your log changes or not.
Entry DN:
cn=replica,cn="dc=example,dc=com",cn=mapping
tree,cn=config
Valid Range:
Changelog activation
0 = no changes are logged
1 = changes are logged
Default Value:
0 (no changes are logged)
Syntax:
Integer
Example:
nsDS5Flags: 0
nsDS5ReplicaBindDN
This multivalued attribute specifies the DN to use when binding. Although you
can have more than one value in this
supplier bind DN per replication agreement.The value can either be the DN of the
local entry on the consumer server or, in the case of an SSL connection, the
certificate identity associated with same DN.
Entry DN:
cn=replica,cn="dc=example,dc=com",cn=mapping
tree,cn=config
Valid Range:
Any valid DN
Default Value:
N/A
Syntax:
DirectoryString
Example:
nsDS5ReplicaBindDN: cn=replication manager,
cn=config
Core Server Configuration Attributes Reference
entry, you can only have one
cn=replica
Chapter 2
Core Server Configuration Reference
89