Nsslapd-Db-Checkpoint-Interval - Netscape DIRECTORY SERVER 6.02 Configuration Manual

If you attempt to set a value that is not a number or is too big for a 32-bit signed
integer you will receive an LDAP_UNWILLING_TO_PERFORM error message
with additional error information explaining the problem.
Entry DN:
cn=config,cn=ldbm database,cn=plugins,cn=config
Valid Range: 500KB to 4GB for 32-bit platforms and 500KB to 2^64-1 for 64-bit
platforms
Default Value: 10,000,000 bytes
Syntax: Integer
Example:
nsslapd-dbcachesize: 10,000,000
On HP-UX only the maximum value for the
NOTE
attribute is 1GB, due to a PA-RISC hardware limitation that prevents
memory-mapped files from crossing quadrant boundaries.

nsslapd-db-checkpoint-interval

The amount of time in seconds after which the Directory Server sends a checkpoint
entry to the database transaction log. The database transaction log contains a
sequential listing of all recent database operations and is used for database
recovery only. A checkpoint entry indicates which database operations have been
physically written to the directory database. The checkpoint entries are used to
determine where in the database transaction log to begin recovery after a system
failure. The
nsslapd db-checkpoint-interval
. To change the checkpoint interval, you add the attribute to
dse.ldif
This attribute can be dynamically modified using
information on modifying this attribute, see Chapter 14, "Tuning Directory Server
Performance" in the Netscape Directory Server Administrator's Guide.
This attribute is provided only for system modification/diagnostics and should be
changed only with the guidance of Netscape engineering staff and Netscape
Professional Services. Inconsistent settings of this attribute and other configuration
attributes may cause the Directory Server to be unstable.
For more information on database transaction logging, see Chapter 12,
"Monitoring Server and Database Activity" in the Netscape Directory Server
Administrator's Guide.
attribute is absent from
ldapmodify
Chapter 3 Plug-in Implemented Server Functionality Reference
Database Plug-in Attributes
nsslapd-dbcachesize
dse.ldif
. For further
.
139