Netscape DIRECTORY SERVER 6.02 Configuration Manual page 201

Table 6-5 Attributes in cn=config not Migrated
Attribute Name
nsslapd-localhost
nsslapd-localuser
nsslapd-port
nsslapd-rootdn
nsslapd-rootpw
nsslapd-accesslog
nsslapd-accesslog-list
nsslapd-auditlog
nsslapd-accesslog-level
nsslapd-errorlog
nsslapd-errorlog-list
nsslapd-instancedir
nsslapd-maxbersize
nsslapd-plug-in
nsslapd-result-tweak
nsslapd-return-exact-case
nsslapd-threadnumber
nsslapd-maxthreadsperconn
Reason for not Migrating Automatically
Already set up.
Configured during the installation process.
Configured during the installation process.
Configured during the installation process.
Configured during the installation process.
Path name to the log that records database access. It is
set up during installation.
Read-only attribute.
Path name to the log that records changes made to the
directory database. It is set up during installation.
Read-only attribute.
Path name to the log that records error messages
generated by Directory Server. It is set up during
installation.
Read-only attribute.
Configured during the installation process.
Do not change the value of this attribute unless told to
do so by Netscape Technical Support.
Reserved for future use. Do not change or remove.
Doing so can have unpredictable results
do not modify unless you have legacy client
applications that can check the case of attribute names
in results returned from the server.
This attribute is not available from the Directory
Server Console.
This attribute corresponds to a system parameter.
Chapter 6
Upgrade from Directory Server 5.0 to 6.x
Migration from Earlier Versions 201