Nslookthroughlimit; Nsslapd-Allidsthreshold - Netscape DIRECTORY SERVER 6.02 Configuration Manual

nsLookthroughLimit

This performance related attribute specifies the maximum number of entries that
the Directory Server will check when examining candidate entries in response to a
search request. If you bind as the directory manager DN, however, unlimited is set
by default and overrides any other settings you may specify here. It is worth noting
that binder based resource limits work for this limit, which means that if a value for
the operational attribute
the default limit will be overridden. If you attempt to set a value that is not a
number or is too big for a 32-bit signed integer you will receive an
LDAP_UNWILLING_TO_PERFORM error message with additional error
information explaining the problem.
Entry DN:
cn=config,cn=ldbm database,cn=plugins,cn=config
Valid Range: -1 to maximum integer in entries (where -1 is unlimited)
Default Value:
5000
Syntax: Integer
Example:
nsLookthroughLimit: 5000

nsslapd-allidsthreshold

This performance related attribute that is present by default, specifies the number
of entry IDs that can be maintained for an index key before the server sets the All
IDs token and stops maintaining a list of IDs for that specific key. If you attempt to
set a value that is not a number or is too big for a 32-bit signed integer you will
receive an LDAP_UNWILLING_TO_PERFORM error message with additional
error information explaining the problem.
However, as tuning this attribute is a complex task and can severely degrade
performance, it is advisable to keep the default value. For a more detailed
explanation of the All IDs Threshold see Chapter 10, "Managing Indexes" in the
Netscape Directory Server Administrator's Guide.
Entry DN:
cn=config,cn=ldbm database,cn=plugins,cn=config
Valid Range: 100 to the maximum 32-bit integer value (2147483647) entry IDs
Default Value:
4000
Syntax: Integer
Example:
nsslapd-allidsthreshold: 4000
nsLookThroughlimit
Chapter 3 Plug-in Implemented Server Functionality Reference
Database Plug-in Attributes
is present in the entry you bind as,
137