Carel c.pco Instructions Manual
Hide thumbs Also See for c.pco:

Advertisement

+0500110FR - rel. 1.1 - 29.06.2016
LOGE
Input precision: ± 0,3 % f.s.
+0500110FR - rel. 1.1 - 29.06.2016
Time constant for each input: 0,5 s
minal pGDE
c.pco
Classification of measuring circuits (CEI EN 61010-1): category I
Commande électronique programmable /
c.pco
Commande électronique programmable
a été activé,
Digital inputs not opt.-isolated , max. num.
free contacts
fast digital inputs: type: free contact, max current:
10 mA, max freq.: 2kHz and resolution: ±1 Hz
WARNING/ATTENTION: See note
Anal. outputs not opt.-isolated (max. nu.)
0...10 Vdc (*)(max current 2 mA)
PWM (output 0/3.3 Vdc, max. current 2 mA, frequ.: 2kHz async., 100 Hz async.)
10.
2
Probe and terminal power supply
55.
0
+VDC for supplying any active probes, the 24 Vdc ± 10% (class 2) can be used, available to the +VDC (J2) terminal. The maximum
10.200
0.
0
+5VREF for supplying the 0 to 5 V raziometric probes, use the 5 Vdc (class 2) (± 5%) available to the +5VREF(J24) terminal.
Vterm 24 Vdc ± 10% (*). Used to power an external terminal alternative to the one connected to J10, Pmax = 1.5W
Dimensions / Dimensions (mm)
Dimensions / Dimensions (mm)
Optically-isolated digital inputs (ID... IDH...)
Maximum number
s in the air-
c.pco family
Min. digital input pulse detection time
vironment, is
sa.carel.com.
Input power supply
Clas. of measuring circuits (CEI EN 61010-1): Category I: 24 Vac/Vdc (J5, J7, J20); Category III: 230 Vac (J8, J19)
Absorbed current digital inputs at 24 Vac/Vdc
Absorbed current digital inputs at 230 Vac
Optically-isolated Analogue outputs (Y...)
Type
Max number
Power supply
Precision
densing (*)
A
Resolution
ondensing
A
B - avec et sans terminal intégré
Settling time
ndensing
Maximum Load 1 kΩ (10 mA)
B - avec et sans terminal intégré
B - with or without built-in terminal
ondensing
B - with or without built-in terminal
nt panel only
B - avec module ULTRACAP (option non compatible avec
Digital outputs NO..., NC...
B - avec module ULTRACAP (option non compatible avec
la vers. du produit munie de la fonction NFC)
Nr. max digital output: 8: SMALL; 13: MEDIUM/ BUILT-IN DRIVER; 18: LARGE; 29: EXTRALARGE
la vers. du produit munie de la fonction NFC)
The relay outputs have different characteristics according to the controller model. The outputs can be divided into groups. The relays belonging
B - with ULTRACAP module
to the same group have an operational insulation between them and thus must be subjected to the same voltage. Between one group and
B - with ULTRACAP module
(not compliant with NFC option)
the other there is reinforced insulation, therefore the relays can be subjected to different voltages. In any case, between every terminal of the
(not compliant with NFC option)
digital outputs and the rest of the controller there is double insulation.
(2)
deliverable current is 150 mA protected against short-circuits.
The maximum deliverable current is 60 mA.
0...10 V optically-isolated on Y1, Y2, Y3, Y4, Y5, Y6 / at cut-off (PWM) opt.-isolated on Y3, Y4 (configurable by softw.)
Small/Medium/Built-in driver/Extralarge
Large
esterna
24 Vac (+10/-15%) o 28...36 Vdc (+10/-20%) su VG(+), VG0(-) (class 2)
Y1...Y6
± 2% full scale
8 bit
Y1...Y6
From 1 s (slew rate 10 V/s) a 20 s (slew rate 0,5 V/s) selectable by SW
Small Medium/Built-in driver/Extralar.
5
2
4: (max 2 on U1...U5, max 2 on
paragraph "Important Warnings / Avertissement importants".
Small
Medium/Built-in driver/ Extralarge
Large
Normally open (open-closed-open)
Normally closed (closed-open-closed) 400 ms
External
A
A
Fig. 1
Fig. 1
Small
Medium
Small
227,5
227,5
70
70
-
-
8
6: (max 2 on U1...U5, max 2
U6...U8)
Small Medium/Built-in driver/Extralar. Large
5
5
no. opt.-isolated inputs
44
24 Vac o 24 Vdc
44
8
12
14
200 ms
IDH...: 230 Vac (+10/-15%) 50/60 Hz
ID...: 24 Vac (+10/-15%) 50/60 Hz o 28...36 Vdc
(-20/+10%)
B
4
Y1...Y4 a 0...10 V
6
Y1...Y6 a 0...10 V
Buit-in driver
Medium
Buit-in driver
315
315
315
315
70
70
70
70
-
75
-
75
Large
10
on U6...U8, 2 on U9...U10)
NO POWER
& SIGNAL
NO POWER
CABLES
& SIGNAL
TOGETHER
CABLES
READ CAREFULLY IN THE TEXT!
TOGETHER
8
10
READ CAREFULLY IN THE TEXT!
8
10
no. opt.-isolated inputs
24 Vac o 230 Vac (50 Hz)
Nessuno
2
4
45
110
45
110
5 mA
5 mA
B
Large Extralarge
Large Extralarge
315
315
315
315
70
70
70
70
-
-
-
-

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the c.pco and is the answer not in the manual?

Questions and answers

Summary of Contents for Carel c.pco

  • Page 1 24 Vac o 230 Vac (50 Hz) Small Nessuno Maximum number Medium/Built-in driver/ Extralarge s in the air- Large c.pco family Normally open (open-closed-open) 200 ms Min. digital input pulse detection time vironment, is Normally closed (closed-open-closed) 400 ms sa.carel.com.
  • Page 2: Terminals And Connectors

    Diode rouge de surcharge +VCC • 1 ligne RS485 pLAN Slave pour afficheur ou autres Le TAG NFC intégré dans la c.pCO permet de lire et écri VG: aliment. sous tension A (*) pour sortie analogique optois. utilisations l’aide du standard radio NFC ISO 15693, une carte EEPR...
  • Page 3 EXTRALARGE Fig. 2...
  • Page 4 Inputs/Outputs label Label Signal type U... Universal inputs/outputs, configuration via software such as: Analogue inputs: - sensors NTC , PTC, PT500, PT1000, PT100 - signals 0 to 1 Vdc or 0 to 10 Vdc, 0/4 to 20 mA, signals 0 to 5 V for raziometric probes Digital inputs (n ot opto-isolated): free contacts (not opto-isolated), fast digital...
  • Page 5: Technical Characteristics

    CAREL for use in many applications in the air- conditioning, refrigeration and HVAC/R sector in general. The controller can be connected over an Ethernet LAN to all c.pco family controllers, and over a pLAN to the pGD terminals. The application program, created in the c.suite development environment, is loaded on the controller via the Ethernet port or USB port using the c.factory software, available on the website http://ksa.carel.com.
  • Page 6 Input precision: ± 0,3 % f.s. Time constant for each input: 0,5 s Classification of measuring circuits (CEI EN 61010-1): category I Digital inputs not opt.-isolated , max. num. Small Medium/Built-in driver/Extralar. Large free contacts fast digital inputs: type: free contact, max current: 4: (max 2 on U1...U5, max 2 on 6: (max 2 on U1...U5, max 2 10 mA, max freq.: 2kHz and resolution: ±1 Hz...
  • Page 7 BR2430, 3 Vdc Battery life: minimum 5 years in normal operating conditions do not replace the battery, contact Carel for replacement. Replace the battery if the time is not Instructions for replacing the battery: updated when restarting the product.
  • Page 8: Universal Inputs/Outputs

    (*) Voltage A: 24 Vac or 28 to 36 Vdc (**) Voltage B: 230 Vac - 50/60 Hz Port J26 configuration The c.pco controllers are equipped with 4 micro-switches to configure the serial port J26: - all micro-switches “DOWN”: port J26 set with FieldBus hardware;...
  • Page 9: Communication Port Specifications

    The uSD card must be inserted into and removed from the socket when the controller is off; if inserted by mistake when the controller is on, it will not be detected. The c.pCO is compatible with uSD memory cards between 2GB and 32GB.
  • Page 10 NFC tag (on models where featured) The NFC tag installed in the c.pCO is read/write, using the NFC ISO 15693 standard, and has a dual EEPROM interface. The memory, available to the application program, can hold device configuration parameters or other information. The memory can be read/written even with the device off.
  • Page 11 Diode de signalisation état vanne raccordement à la terre des deux côtés, pour le port de final product to malfunction of which CAREL can not be held responsible. The final client must use the product informations, voir l com. pLAN jaune : fermeture vanne –...

Table of Contents