Advertisement
Quick Links
TINI2
• Multifunctional OLED Real-Time Display
• USB-C Charging
• Advanced Power Cut-Off (APC) Technology
All NITECORE
®
product can be exchanged for a replacement through a local distributor/
dealer within 15 days of purchase. After that, all defective / malfunctioning
NITECORE
products can be repaired free of charge within 24 months
®
from the date of purchase. Beyond 24 months, a limited warranty applies,
covering the cost of labor and maintenance, but not the cost of accessories
or replacement parts.
The warranty will be nullified if
1. he product(s) is/are broken down, reconstructed and/or modified by
unauthorized parties;
2. the product(s) is/are damaged due to improper use.
For the latest information on NITECORE
contact a local NITECORE
nitecore.com
※ All images, texts and statements specified herein this user manual are
for reference purposes only. Should any discrepancy occur between
this manual and information specified on www.nitecore.com, Sysmax
Innovations Co., Ltd. reserves the rights to interpret and amend the
content of this document at any time without prior notice.
SYSMAX Innovations Co., Ltd.
TEL:
+86-20-83862000
FAX:
+86-20-83882723
E-mail:
info@nitecore.com
Web:
www.nitecore.com
Address： Rm 2601-06, Central Tower,
No.5 Xiancun Road, Tianhe District,
Guangzhou,510623, Guangdong, China
Please find us on facebook : NITECORE Flashlight
Warranty Service
products are warranted for quality. Any DOA / defective
distributor or send an email to service@
®
Thanks for purchasing NITECORE!
Dual-Core Intelligent
Keychain Light
products and services, please
®
Made in China
TINI030920
Advertisement
Related Manuals for Nitecore TINI2
Summary of Contents for Nitecore TINI2
- Page 1 SYSMAX Innovations Co., Ltd. TEL: +86-20-83862000 FAX: +86-20-83882723 E-mail: info@nitecore.com Web: www.nitecore.com Address： Rm 2601-06, Central Tower, No.5 Xiancun Road, Tianhe District, Guangzhou,510623, Guangdong, China Made in China Please find us on facebook : NITECORE Flashlight Thanks for purchasing NITECORE! TINI030920...
- Page 2 Q&A Q: Why does my TINI2 shut down in 30 seconds? A: TINI2 has 2 user modes, DEMO Mode and DAILY Mode. The default setting is DEMO Mode where the product will automatically shut down if there is no operation in 30 seconds. It is recommended to switch it to DAILY Mode when in daily use. Please follow the steps below for mode switching: 1. When the light is on/off, long press both the Power Button and the Mode Button simultaneously to switch between DEMO and DAILY Mode. 2. The LED will flash to indicate the current user mode: 1 flash to indicate DEMO Mode and 2 flashes to indicate DAILY Mode. Features • Utilizes 2 x OSRAM P8 LEDs with a max output of 500 lumens • Max peak beam intensity of 2,000cd and max throw of 89 meters • Utilizes a total reflective optic lens for uniform and soft light...
- Page 3 (English) TINI2 Operating Instructions Multifunctional OLED Display TINI2 is equipped with a multifunctional OLED display. (Please remove the screen protector before the first use.) When the light is turned on, the screen will successively show the current info (Brightness Level & Lumens, Runtime Remaining, User Mode) before it goes out. After the screen goes out, short pressing the Mode Button can reactivate the screen. Display Demonstration Function • This function is used for demonstration ONLY. It does not reflect the actual light status. • When the light is off, press and hold the power button even after the light accesses ULTRALOW until the light is turned off to enter the display demonstration. • In this status, the screen will cycle through various informational displays. Short press either button to exit this status. On / Off On: When the light is off, short press the Power Button to turn it on. Off: When the light is on, short press the Power Button to turn it off. User Modes TINI2 has 2 user modes, DEMO Mode and DAILY Mode.
Need help?
Do you have a question about the TINI2 and is the answer not in the manual?
Questions and answers