Related Manuals for Nitecore TIP SE
Summary of Contents for Nitecore TIP SE
- Page 1 TIP SE Dual-Core Metallic Keychain Light USB-C Rechargeable • 2 User Modes Available • Dual Key Ring Connector •...
- Page 2 Q&A Q: Why does my TIP SE shut down in 30 seconds? A: The TIP SE has 2 user modes, DEMO Mode and DAILY Mode. The default setting is DEMO Mode where the product will automatically shut down if there is no operation in 30 seconds. It is recommended to switch it to DAILY Mode when in daily use. Please follow the steps below for mode switching: 1. When the light is on/off, long press both the Power Button and the Mode Button simultaneously to switch between DEMO and DAILY Mode. 2. The light will flash to indicate the current user mode: flashing once to indicate DEMO Mode and flashing twice to indicate DAILY Mode. Features • Utilizes 2 x OSRAM P8 LEDs with a max output of 700 lumens • Utilizes a total reflective optic lens for uniform and soft light • Built-in 500mAh Li-ion battery • Built-in Li-ion battery charging circuit with a USB-C port • Multifunctional clip included • 2 user modes available (DEMO Mode and DAILY Mode) • Easily operable dual switch design • 4 brightness levels available with direct access to TURBO/LOW • Intelligent memory function...
- Page 3 (English) TIP SE Charging Function Connecting to the External Power: As illustrated, use the USB cable to connect an external power supply to the charging port on the side to begin the charging process. Charging Indicators: During the charging process, the red indicators located beneath the buttons will be turned on steadily. When the battery is fully charged, the indicators will turn green. • When the power is low, the red indicators will flash to inform the user. • The charging time is approx. 1h 30min. The standby time is approx. 12 months when the battery is fully charged. Operating Instructions On / Off On: When the light is off, short press the Power Button to turn it on. Off: When the light is on, short press the Power Button to turn it off. User Modes The TIP SE has 2 user modes, DEMO Mode and DAILY Mode. DEMO Mode: The light will automatically shut down if there is no operation in 30 seconds. DAILY Mode: The light will not automatically shut down and will need to be shut down manually. Note: The default setting is DEMO Mode. It is recommended to switch it to DAILY Mode when in daily use. Mode Switching When the light is on/off, long press both the Power Button and the Mode Button simultaneously to switch between DEMO and DAILY Mode.
- Page 4 ® nitecore.com ※ All images, texts and statements specified herein this user manual are for reference purposes only. Should any discrepancy occur between this manual and information specified on www.nitecore. com, Sysmax Innovations Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice. SYSMAX Innovations Co., Ltd. TEL: +86-20-83862000 FAX: +86-20-83882723 E-mail: info@nitecore.com Web: www.nitecore.com Address: Rm 2601-06, Central Tower, No.5 Xiancun Road, Tianhe Made in China District, Guangzhou,510623, TIP2206SE20 Guangdong, China Thanks for purchasing NITECORE! Please find us on facebook : NITECORE Flashlight...
Need help?
Do you have a question about the TIP SE and is the answer not in the manual?
Questions and answers