Advertisement
Head Diameter: | 0.59" ( 15.04mm) |
Size: | 1.7"×1"×0.45" (43.3mm×25.4mm×11.5mm) |
Weight: | 0.47oz (13.4g) |
Key Clasp
USB Stand
FL1 STANDARD | Turbo | High | Mid | Low |
![]() | 380 lumens | 145 lumens | 38 lumens | 1 lumen |
![]() | *15min | 1h | 4h | 60h |
![]() | 64m | 40m | 19m | 3.9m |
![]() | 1020cd | 400cd | 95cd | 3.8cd |
![]() | 1.5m(Impact Resistance) | |||
![]() | IP54 rating |
NOTE: Stated data has been measured in accordance with the international flashlight testing standards ANSI/NEMA FL1 using an integrated and fully charged 3.7V 280mAh rechargeable Li-ion battery under laboratory conditions. End-user results may vary due to individual usage habits and environmental conditions.
* The runtime for Turbo mode is the testing result before starting temperature regulation.
Turn on: When the light is off, press and hold the power switch for 2 seconds to turn the light on.
Turn off: When the light is on, tap the power switch once to turn the light off.
The TINI has a demo mode and a daily mode. Demo mode: If no further operation for 30 seconds, the TINI will automatically turn off. Daily mode: In daily mode, the TINI needs to be turned off manually.
NOTE: For daily use, NITECORE recommends users to switch to the daily mode first.
When the TINI is on/off, press and hold the power switch and mode switch simultaneously to alternate Demo and Daily mode. The light will flash to notify users the current mode: one flash represents "Demo Mode"; two flashes represent "Daily Mode".
NOTE: In Demo mode, the TINI will automatically turn off after 30 seconds interval. If turning it on again within 3 seconds of automatic turn off, the TINI will enter the daily mode temporarily.
When the light is turned on, tap the mode switch repeatedly to cycle through Low-Mid-High (The TINI has memory function, it will revert to the last setting where the TINI was turned off when turning it on again.)
When it is on or off, press and hold the mode switch for 0.6 second to enter the Turbo mode, release to return to the previously used mode.
With incorporated Advanced Temperature Regulation module, the TINI regulates its outputs and adapts to the ambient environment, therefore maintaining optimal performance.
When the TINI is turned off, tap the function mode once, the blue indicator beneath the two switches will blink to report its remaining power:
NOTE: When the power level is low, the blue indicators will blink once every 3 seconds to notify user and the light may be dim or unresponsive.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the TINI and is the answer not in the manual?
Questions and answers