Download Print this page
Hide thumbs Also See for StudSensor e40:

Advertisement

Quick Links

EN
The StudSensor
e40 features two
scanning modes:
• STUD SCAN: Locates the edges
of wood and metal studs up to
19 mm deep
• DEEPSCAN
: Locates the edges
of wood and metal studs up to
38 mm deep
WireWarning
detection automatically
detects and alerts the user to live AC
wires in STUD SCAN and DEEPSCAN
modes. When AC voltage is detected,
the AC WireWarning
Note: This product is intended only
for use with an optimum voltage
range of 110–127 V.
DeepScan, SpotLite, StudSensor, WireWarning, and Zircon are registered trademarks or trademarks of Zircon Corporation.
Visit www.zircon.com/support for the most current instructions.
LIMITED 1 YEAR WARRANTY
Zircon Corporation, ("Zircon") warrants this product to be free from defects
in materials and workmanship for one years from the date of purchase.
Any in-warranty defective product returned to Zircon*, freight prepaid
with proof of purchase date and $5.00 to cover postage and handling,
will be repaired or replaced at Zircon's option. This warranty is limited to
the electronic circuitry and original case of the product and specifically
excludes damage caused by abuse, unreasonable use or neglect. This
warranty is in lieu of all other warranties, express or implied, and no other
representations or claims of any nature shall bind or obligate Zircon. Any
implied warranties applicable to this product are limited to the one year
period following its purchase. IN NO EVENT WILL ZIRCON BE LIABLE FOR
ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING
FROM POSSESSION, USE OR MALFUNCTION OF THIS PRODUCT.
In accordance with government regulations, you are advised that: (i) some
states do not allow limitations on how long an implied warranty lasts and/
or the exclusion or limitation of incidental or consequential damages, so the
above limitations and/or exclusions may not apply to you, and further (ii)
this warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
StudSensor
Stud Finder
icon will illuminate.
e40
Stud Edge Groove
Red EDGE Light
STUD SCAN
Mode
Power Button
Battery Door Tab
Return product freight prepaid with proof of purchase date (dated sales
receipt) and $5.00 to cover postage and handling, to:
Zircon Corporation
*Attn: Returns Department
1580 Dell Avenue
Campbell, CA 95008-6992 USA
Be sure to include your name and return address. Out of warranty service
and repair, where proof of purchase is not provided, shall be returned with
repairs charged C.O.D. Allow 4 to 6 weeks for delivery.
Customer Service, 1-800-245-9265 or 1-408-963-4550
Monday–Friday, 8:00 a.m. to 5:00 p.m. PDT
www.zircon.com • info@zircon.com
ZirconCorporation
©2012 Zircon Corporation • P/N 63817 • Rev D 08/12
SpotLite
Pointer
Green
READY
Light
DEEPSCAN
Mode
Mode Switch
WireWarning
Detection Indicator
ZirconTV

Advertisement

loading
Need help?

Need help?

Do you have a question about the StudSensor e40 and is the answer not in the manual?

Questions and answers

Summary of Contents for Zircon StudSensor e40

  • Page 1 ™ Detection Indicator Battery Door Tab DeepScan, SpotLite, StudSensor, WireWarning, and Zircon are registered trademarks or trademarks of Zircon Corporation. Visit www.zircon.com/support for the most current instructions. LIMITED 1 YEAR WARRANTY Return product freight prepaid with proof of purchase date (dated sales receipt) and $5.00 to cover postage and handling, to:...
  • Page 2 1. INSTALLING THE BATTERY Push in the battery door tab at the bottom of the tool and open the door. Insert a new 9 V battery, matching the positive (+) and negative (-) terminals to the icons printed on the back.
  • Page 3 Always turn off the power when working near electrical wires. WORKING WITH DIFFERENT MATERIALS StudSensor e40 is for use on dry interior walls only. ™ Note: Sensing depth and accuracy can vary due to moisture, content of materials, wall texture, and paint.
  • Page 4 Continue to hold the Power button, then slowly slide unit horizontally across the wall, left or right. As you begin to approach a stud, the arrow segments will begin to turn on. When the top red EDGE light is lit, the SpotLite ™...
  • Page 5 Electrical field locators may WARNING not detect live AC wires if wires are more than 51 mm from the scanned surface, encased in conduit, present behind a plywood shear wall or metallic wall covering, or if moisture is present in the environment or scanned surface.
  • Page 6 6. HELPFUL HINTS (See also number 2, Operating Tips) Solutions Situation Probable Causes Lights start blinking • Scan began on dense part of wall or • Turn unit off, move over 5–8 cm, press Power button, and unit beeps over a stud. and start again.