Zircon StudSensor e50 Manual

GB
The StudSensor
™
scanning modes:
• STUD SCAN: Locates the edges
of wood and metal studs up to
19 mm deep
• DEEPSCAN : Locates the edges
®
of wood and metal studs up to
38 mm deep
WireWarning detection automatically
®
detects and alerts the user to live AC
wires in STUD SCAN and DEEPSCAN
modes. When AC voltage is detected,
the AC WireWarning
displayed on screen.
DeepScan, SpotLite, StudSensor, TruCal, WireWarning, and Zircon are registered trademarks or trademarks of Zircon Corporation.
Visit www.ZirconEurope.com for the most current instructions.
LIMITED 2 YEAR WARRANTY
Zircon Corporation, ("Zircon") warrants this product to be free
from defects in materials and workmanship for two years from
the date of purchase. Any in-warranty defective product returned
to the place of purchase with proof of purchase date will replaced
at retailer´s option. This warranty is limited to the electronic
circuitry and original case of the product and specifically
excludes damage caused by abuse, unreasonable use or neglect.
This warranty is in lieu of all other warranties, express or implied,
and no other representations or claims of any nature shall bind or
obligate Zircon. Any implied warranties applicable to this product
are limited to the two years period following its purchase.
StudSensor
Stud Finder
e50 features two
icon will be
®
™
Stud Edge Groove
WireWarning
Detection
Indicator
®
STUD SCAN
Mode
Power
Button
Battery
Door Tab
IN NO EVENT WILL ZIRCON BE LIABLE FOR ANY SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
POSSESSION, USE OR MALFUNCTION OF THIS PRODUCT.
www.ZirconEurope.com
E-mail: info@zircon.com
©2012 Zircon Corporation • P/N 63979 • Rev C 09/12
e50
®
SpotLite Pointer
®
TruCal Icon
®
DEEPSCAN
®
Mode
Mode Switch