Bissell EV675 Quick Start Manual

QUICK START GUIDE
EV675
Assembly Instructions
Package Contents
Setting Up Your Robot
1
on
40"
he
40"
79"
n
the
Place the back of Docking
Station firmly against a wall.
Ensure there are at least 40
inches to one side, 40 inches
to the opposing side and no
put
obstructions in front of the
Docking Station.
BISSELL®
e
EV675
Package Contents
NOTE: Standard accessories may vary by model.
BISSELL® Docking
EV675 Station
NOTE: Standard accessories may vary by model.
161-8186 Rev 01/19
e play
robot
ll beep
ate that
aired.
Remote Control
(2 AAA Batteries included)
Dust Bin
(Pre-installed)
ROBOTIC VACUUM
Set the Clock
Pair the Remote to the Robot
NOTE : Be sure to install batteries in the remote. 1
2
While the Power Switch
on the side of the robot is
OFF (0), press and hold the
play button on the remote
for 5 seconds until the clock
NOTE : Be sure to install batteries in the remote.
Insert the Docking Station While the Power Switch
power adapter plug into on the side of the robot is
icon on the display flashes.
the port on the side of the OFF (0), press and hold the
Docking Station and then play button on the remote
plug the other end into the for 5 seconds until the clock
wall outlet. Turn ON the icon on the display flashes.
unit's Power Switch and put
on the Docking Station.
The first charge will take
4-5 hours.
Power Adapter Remote Control
(Charger) (2 AAA Batteries included)
Set the time by
pressing and
holding the clock
button on the
Remote Control
until the clock icon
on the Remote
Control display
begins to flash.
Pleated Filter
(Located inside Dust Bin)
unit's Power Switch and
Refer to the enclosed user guide for complete
on the Docking Station.
instructions and important safety notices.
The first charge will take
4-5 hours.
2
1 2
Continue to hold the play
button and turn the robot
ON (I).
NOTE: The robot will beep
three times to indicate that
it has successfully paired.
Docking
Station
Edge Cleaning Rechargeable
Brushes Li-Ion Battery
(Pre-installed)
Use the
directional
arrows to set the
hour and minute.
Edge Cleaning
Brushes
Foam Filter
(Located inside Dust Bin)
WARNING
Refer to the enclosed user guide for complete
instructions and important safety notices.
Set the Clock
3
1 2
Continue to hold the
button and turn the r
ON (I).
NOTE: The robot wil
three times to indica
Set the time by Use the
pressing and directional
arrows to set the
holding the clock
it has successfully pa
hour and minute.
button on the
Remote Control
until the clock icon
on the Remote
Control display
Power Adapter
begins to flash.
(Charger)
Dust Bin Pleated Filter Foam Filter
(Pre-installed) (Located inside Dust Bin) (Located inside Dust Bin)
Press the clock
button again to
save the time
setting.
NOTE: The robo
will beep once to
confirm the time
Rechargeable
has been saved.
Li-Ion Battery
(Pre-installed)
Cleaning Tool
2503 SERIES
3
Press the clock
button again to
save the time
setting.
NOTE: The robot
will beep once to
confirm the time
has been saved.
Cleaning Tool