Red Hat ENTERPRISE LINUX 4 - ADMINISTRATION Manual page 40

Chapter 3. Configuring Red Hat Cluster With Conga
Note
If this is an initial cluster configuration, no fence devices have been created, and
therefore none are displayed.
2. Click Add a Fence Device. Clicking Add a Fence Device causes the Add a Sharable Fence
Device page to be displayed (refer to
Figure 3.1. Fence Device Configuration
3. At the Add a Sharable Fence Device page, click the drop-down box under Fencing Type and
select the type of fence device to configure.
4. Specify the information in the Fencing Type dialog box according to the type of fence device.
Appendix B, Fence Device Parameters
Refer to
parameters.
30
Figure 3.1, "Fence Device
for more information about fence device
Configuration").