Adding A Cluster Service To The Cluster - Red Hat ENTERPRISE LINUX 4 - ADMINISTRATION Manual

Workgroup — Enter the Windows workgroup name or Windows NT domain of the Samba
service.
Note
When creating or editing a cluster service, connect a Samba-service resource
directly to the service, not to a resource within a service. That is, at the Service
Management dialog box, use either Create a new resource for this service
or Add a Shared Resource to this service; do not use Attach a new Private
Resource to the Selection or Attach a Shared Resource to the selection.
3. When finished, click OK.
4. Choose File => Save to save the change to the /etc/cluster/cluster.conf configuration
file.

5.8. Adding a Cluster Service to the Cluster

To add a cluster service to the cluster, follow these steps:
1. At the left frame, click Services.
2. At the bottom of the right frame (labeled Properties), click the Create a Service button. Clicking
Create a Service causes the Add a Service dialog box to be displayed.
3. At the Add a Service dialog box, type the name of the service in the Name text box and click OK.
Clicking OK causes the Service Management dialog box to be displayed (refer to
"Adding a Cluster Service").
Note
Use a descriptive name that clearly distinguishes the service from other services in
the cluster.
Adding a Cluster Service to the Cluster
Figure 5.12,
71