Fence Device Parameters - Red Hat ENTERPRISE LINUX 4 - ADMINISTRATION Manual

Appendix B. Fence Device Parameters
This appendix provides tables with parameter descriptions of fence devices.
Note
Certain fence devices have an optional Password Script parameter. The Password
Scriptparameter allows specifying that a fence-device password is supplied from a
script rather than from the Password parameter. Using the Password Script parameter
supersedes the Password parameter, allowing passwords to not be visible in the cluster
configuration file (/etc/cluster/cluster.conf).
Field Description
Name A name for the APC device connected to the cluster.
IP Address The IP address assigned to the device.
Login The login name used to access the device.
Password The password used to authenticate the connection to the device.
Password The script that supplies a password for access to the fence device. Using this
supersedes the Password parameter.
Script
(optional)
Port The switch outlet number.
Switch The switch number for the APC switch that connects to the node when you have
(optional) multiple daisy-chained switches.
Use SSH (Rhel 4.8 and later) Indicates that system will use SSH to access the device.
Table B.1. APC Power Switch
Field Description
Name A name for the Brocade device connected to the cluster.
IP Address The IP address assigned to the device.
Login The login name used to access the device.
Password The password used to authenticate the connection to the device.
Password The script that supplies a password for access to the fence device. Using this
supersedes the Password parameter.
Script
(optional)
Port The switch outlet number.
Table B.2. Brocade Fabric Switch
Field Description
Name A name for the Bull PAP system connected to the cluster.
IP Address The IP address assigned to the PAP console.
Login The login name used to access the PAP console.
Password The password used to authenticate the connection to the PAP console.
87