Acl Reference; Certserver.acl.configuration - Red Hat CERTIFICATE SYSTEM 7.3 - ADMINISTRATION Administration Manual

Chapter 17. User and Group Authorization
Figure 17.8. Creating and Editing ACIs
a. Select the allow or deny radio button from the Access field to allow or deny the operation to
the groups, users, or IP addresses specified. For more information about allowing or denying
Section 17.6.4.1, "Allow and
access, see
b. Set the rights for the access control. The options are read and modify. To set both, use the
Ctrl or Shift buttons.
c. Specify the user, group, or IP address that will be granted or denied access in the Syntax
Section 17.6.4.3, "Syntax"
field. See

17.7. ACL Reference

This section lists all ACL resources defined for all subsystems, describes what each resource controls,
lists the possible operations describing the outcome of those operations, and provides the default ACIs
for each ACL resource defined. Each subsystem contains only those ACLs that are relevant to that
subsystem.

17.7.1. certServer.acl.configuration

Controls operations to the ACL configuration.
406
Deny".
for details on syntax.