Red Hat CERTIFICATE SYSTEM 7.3 - ADMINISTRATION Administration Manual page 176

Chapter 5. Registration Authority
On the Administrator interface, click Add New User or Add New Group, and enter the required
2.
details.
When you have entered all of the required details, click Add User or Add Group, as appropriate.
3.
Note
If you are adding a new user, this user must have already enrolled for and received a
certificate.
Procedure 5.15. To add a user to a group:
Navigate to the Certificate System Services page, and click Administrator Services.
1.
On the Administrator interface, click List Groups to display the list of existing groups.
2.
3. Click the GID of the group to which you want to add the user.
Select the user from the New Member list, and then click Add.
4.
Deleting Users and Groups
You can use the Administrator interface of the RA to delete existing users and groups, as described
below.
Procedure 5.16. To delete a user:
Navigate to the Certificate System Services page, and click Administrator Services.
1.
On the Administrator interface, click List Users to display the list of existing users.
2.
3. Click the UID of the user that you want to delete.
Scroll to the bottom of the User Information page, and click Delete.
4.
Procedure 5.17. To delete a group:
Navigate to the Certificate System Services page, and click Administrator Services.
1.
On the Administrator interface, click List Groups to display the list of existing groups.
2.
Click the GID of the group that you want to delete, and then click Delete This Group.
3.
Note
Deleting a group has no effect on the users who may be members of that group. That is,
these users will still exist in Certificate System. Their membership in any other groups is
not affected.
Procedure 5.18. To delete a user from a group:
Navigate to the Certificate System Services page, and click Administrator Services.
1.
154