Using The Agent Services Interface; Using The Administrator Interface - Red Hat CERTIFICATE SYSTEM 7.3 - ADMINISTRATION Administration Manual

Upon successful enrollment, the base64 encoding of the certificate is displayed and can be
copied.
5.3.3.5. Requesting Status Checks
You use the Request Status page to request the status of any submitted CSR.
To request the status of a CSR, enter the request ID in the Request Id field and click Check. This
returns a page with the status of the CSR, including any error messages.

5.3.4. Using the Agent Services Interface

You use the Agent Services interface to list certificate requests and certificates.
The List Requests page provides a table of CSRs and their current status. You can display CSRs
according to their status, either OPEN, APPROVED, REJECTED, or FAILED.
The List Certificates page provides information on each of the approved requests. The request with
the lowest ID (typically 1) is displayed first.

5.3.5. Using the Administrator Interface

The following sections describe the functionality provided by the Administrator Interface. This includes
the basic procedures for working with users and groups in the Certificate System, such as adding and
deleting users and groups, associating users with groups, etc.
Note
These procedures require Administrator access to the Certificate System
Listing Users and Groups
You can use the Administrator interface of the RA to list existing users and groups, as described
below.
Procedure 5.13. To list existing users and groups:
Navigate to the Certificate System Services page, and click Administrator Services.
1.
On the Administrator interface, click List Users or List Groups. The details of existing users and
2.
groups are displayed in a table, which includes UID, Name, and Email information, as appropriate.
Adding Users and Groups
You can use the Administrator interface of the RA to add users and groups, and also to associate
users with groups, as described below.
Procedure 5.14. To add a new user or group:
Navigate to the Certificate System Services page, and click Administrator Services.
1.
Using the Agent Services Interface
153