Red Hat CERTIFICATE SYSTEM 7.3 - ADMINISTRATION Administration Manual page 225

Parameter
conn.drmn.retryConnect
conn.drmn.SSLOn
conn.drmn.keepAlive
conn.drm1.servlet.GenerateKeyPair
conn.drm1.servlet.TokenKeyRecovery
Table 8.4. DRM Connection Settings
Parameter
auth.instance.n.attributes
auth.instance.n.type
auth.instance.n.libraryName
auth.instance.n.libraryFactory
auth.instance.n.authId
auth.instance.n.hostport
auth.instance.n.SSLOn
auth.instance.n.retries
TPS Configuration Parameters
Description
the DRM, and the client should be a configured
DRM agent.
The number of times the TPS tries to reconnect
to the DRM after a connection attempt fails. The
valid values are integers. For example, 3.
Sets whether SSL needs to be turned on for
the connection to the DRM. This value must be
true.
Sets whether to keep the connection to the DRM
alive or terminate it after every operation. The
valid values are true|false.
The servlet for handling server-side key pair
generation; for example, /kra/agent/kra/
GenerateKeyPair.
The servlet for handling smart card key
recovery; for example, /kra/agent/kra/
TokenKeyRecovery.
Description
The LDAP attributes of the user entry to be
retrieved, if attributes are present, such as
auth.instance.0.attributes=mail,cn,uid.
Once retrieved, these attributes can
be used in other parameter entries
as $auth.attr name$. For example,
op.enroll.userKey.keyGen.tokenName=
$userid$ [$auth.cn$].
The authentication type to use. This must be
LDAP_Authentication.
The library to use for LDAP authentication.
Provide the full path to the library. The filename
must be libldapauth.so.
The function name to use for
LDAP authentication. This must be
GetAuthentication.
Specifies this authentication instance ID to use to
define operations. For example, ldap1.
The LDAP hostname and port number. The
format is ldap-hostname:ldap-port.
Sets whether SSL should be turned on. The valid
values are true|false.
The number of times authentication is tried
after failure. The valid values are integers. For
example, 1.
203