Red Hat CERTIFICATE SYSTEM 7.3 - ADMINISTRATION Administration Manual page 303

Figure 13.9. Certificate Profile Outputs
Outputs can be added and deleted. It is possible to select edit for an output, but since outputs
have no parameters or other settings, there is nothing to configure.
a. To add an output, click Add.
b. Choose the output from the list, and click OK.
c. Give a name or identifier for the output, and click OK.
This output will be listed in the output tab. You can edit it to provide values to the parameters
in this output.
To delete an output, select the output from list, and click Delete.
10. To modify an existing certificate profile, select a certificate profile, click Edit/View.
The Certificate Profile Rule Editor window appears. If necessary, enlarge the window by pulling
out one of the corners of the window.
Modifying Certificate Profiles through the CA Console
281