Battery Charge - CANGAROO GRACE User Manual

22.Never wash and sterilize the electrical parts of the product – the motor of the pump and
the AC adaptor in order not to cause permanent damage to the product.
➢Figure PD: BL – bottle cap; SN – Silicone nipple; BC – Bottle ring; DS – Safety cover/ pump stand; MP – Silicone
massage pad; AH – Air hole; PB – Pump body; BB – Baby milk bottle; V – Valve; P – Silicone piston; C – Pump cover;
AT – connecting tube; PM – pumping mechanism; ATI – Connecting tube interface;
➢ Figure P - L:Levels; M:Massage; S:Suction; L-:Level down; L+:Level down; WT:Working time; B:Battery charge
level;
Type
Item Number
Working Voltage
Working Power
Rated Input Voltage
Rated Input Current
Battery capacity
Adapter
Time
Using time after full charge
Display
Control
Product size
Materials
1.Before first time use charge the battery completely.
2.The supplied adapter is with type C plug.
3.The breast pump is with a built-in battery 3.7V/ 1400 mAh.
4.Charging:
-Connect the adapter to the charging jack of the pumping mechanism.
-Insert the plug into electrical outlet of the mains supply of your home.
-We recommend you to leave the breast pump to charge completely before next use in order to prolong its battery life.
5.Use only the charger provided with the breast pump. Do not use chargers from other products.
6.Charge the battery on time. Charge as soon as the battery indicator is with 1 bar or the indicator starts flashing.
7.After the battery is fully charged the indicator will stop flashing.
8.If you will not use the product for a long time, charge the battery completely before storing it. Then charge the battery
at least once a month to prolong its life.
9.If the battery is damaged or cannot be charged anymore, do not try to open the product by yourselves. For consultation
and repair contact the shop from where you bought the product or the importer/ distributor.
10.The battery is recyclable. If the product is damaged and cannot be used any longer, take it to an official collection point
for electronic products' waste, batteries, chargers.
II. PARTS
III. CHARACTERISTICS
Pumping mechanism: 118 x 77 x 39 mm
Bottle + Pump body: 185 x 89 x 89 mm
PP – Safety Cover (stand) Pump cover, Bottle cap, Bottle ring, Pump body, Baby bottle
Silicone – Valve, Silicone piston, Nipple, Silicone massage pad
IV. BATTERY CHARGE
Parameters
XN-D258
3.7V
5W
5V
1A
1400mAh
AC100V – 240V; DC 5V, 1A
120 minutes
160 minutes
LED
Touchscreen panel
12