Sony XAV-AX8000 Manual

Guide to Parts and Controls

Main Unit and Remote Commander
Main unit

The VOL (volume) + button has a tactile dot.

1. Display/touch panel
2. HOME
   Displays the HOME screen.
   STANDBY
   Press and hold to turn the unit to standby mode (USB charging is still available). To resume, press any button.
3. VOL (volume) +/–
4. ATT (attenuate)
   Attenuates the sound.
   To cancel, press again, or press VOL +.
   MONITOR OFF
   Press and hold to turn off the monitor.
   To turn back on, touch any part of the display.
5. Receptor for the remote commander
6. OPTION
   Displays the OPTION screen.
7. (previous/next)
   Functions differently depending on the selected source:
   • Radio: select a preset station.
   • SiriusXM: select a preset channel.
   • USB/BT Audio: move to the previous/next file.
     Press and hold to:
   • Radio: tune into a station automatically (SEEK+/SEEK–).
   • USB/BT Audio: fast-reverse/fast-forward.
8. VOICE
   Activates the voice command function for Apple CarPlay and Android Auto™.

RM-X170 remote commander

The remote commander can be used to operate the audio controls. For menu operations, use the touch panel.

Note
The white buttons in the illustration above are not supported.

9. OFF
   Turns the source off.
10. MONITOR OFF
    Turns off the monitor.
    To turn back on, press again.
11. EQ (equalizer)
    Selects an equalizer curve.
12. Number buttons (0 to 9)
13. CLEAR
14. ATT (attenuate)
    Attenuates the sound. Press again to cancel the attenuation.
15. (play/pause)
16. (previous/next)
    (fast-reverse/fast-forward)
    Functions differently depending on the selected source:
    • Radio: select a preset station.
    • SiriusXM: select a preset channel.
    • USB/BT Audio: move to the previous/next file.
      Press and hold to:
    • Radio: tune into a station automatically (SEEK+/SEEK–).
    • USB/BT Audio: fast-reverse/fast-forward.
17. 
    Functions differently depending on the selected source.
    • Radio: select a preset station or tune into a station automatically.
    • SiriusXM: select a preset channel or move to the previous/next channel.
    • USB: select a folder or move to the previous/next file.
      ENTER
      Enters the selected item.
18. SRC (source)
    Changes the source. Each time you press this button, a selectable source is displayed in a popup on the current display.
19. MODE
    Selects the radio band.
    Remove the insulation film before use.
    

Screen displays

Playback screen:

HOME screen:

OPTION screen:

1. Status indication

   	Lights up when the sound is attenuated.
   	Indicates the signal strength status of the connected SiriusXM Connect Vehicle Tuner.
   	Lights up when the Bluetooth® signal is on. Flashes when the connection is in progress.
   	Lights up when the audio device is playable by enabling the A2DP (Advanced Audio Distribution Profile).
   	Lights up when handsfree calling is available by enabling the HFP (Handsfree Profile).
   	Indicates the signal strength status of the connected mobile phone.
   	Indicates the remaining battery status of the connected mobile phone.

2. (source option)
   Opens the source option menu. The available items differ depending on the source.
3. Application specific area
   Displays playback controls/indications or show the unit's status. Displayed items differ depending on the source.
4. Clock
   Displays the time which are set on the Date/ Time setting.
5. (return to the playback screen)
   Switches from the HOME screen to the playback screen.
6. Sources and Settings select keys
   Changes the source or make various settings.
   Flick to select the setting icon and other icons. Touch the source icon you want to select.

   Android Auto	Apple CarPlay	Radio
   SXM	BT Audio	Phone
   USB	Rear Camera	Settings

7. Sound select keys
   Changes the sound.
8. (EXTRA BASS)
   Changes the EXTRA BASS setting.
9. (EQ10/Subwoofer)
   Changes the EQ10/Subwoofer setting.
10. (monitor off)
    Turns off the monitor. When the monitor is turned off, touch any part of the display to turn it back on.

Preventing an accident
Pictures appear only after you park the car and set the parking brake.
If the car starts moving during video playback, the following caution is displayed and you cannot watch the video.

[Video blocked for your safety.]
Do not operate the unit or watch the monitor while driving.

Connection

^*1 Not supplied
^*2 Speaker impedance: 4 Ω to 8 Ω × 4
^*3 RCA pin cord (not supplied)
^*4 Depending on the type of car, use an adaptor for a wired remote control (not supplied).
For details on using the wired remote control, see "Using the wired remote control".
^*5 Depending on the type of car, use an adaptor (not supplied) if the antenna (aerial) connector does not fit.
^*6 Whether in use or not, route the microphone input cord so it does not interfere with driving operations. Secure the cord with a clamp, etc., if it is installed around your feet.
^*7 For details on installing the microphone, see "Installing the microphone".
^*8 For more information on how to install the SiriusXM Connect Vehicle Tuner, consult the installation guide included with the tuner.
<sup>9*

*10</sup> When using the steering wheel remote control, use the connection cable RC-SR1 as necessary.

Making connections

1. To a common ground (earth) point
   First connect the black ground (earth) lead then connect the yellow and red power supply leads.
2. To the +12 V power terminal which is energized at all times
   Be sure to first connect the black ground (earth) lead to a common ground (earth) point.
3. To the +12 V power terminal which is energized when the ignition switch is set to the accessory position
   Be sure to first connect the black ground (earth) lead to a common ground (earth) point.
4. To the power antenna (aerial) control lead or the power supply lead of the antenna (aerial) booster
   It is not necessary to connect this lead if there is no power antenna (aerial) or antenna (aerial) booster, or with a manually-operated telescopic antenna (aerial).
   To AMP REMOTE IN of an optional power
   amplifier
   This connection is only for amplifiers and a power antenna (aerial). Connecting any other system may damage the unit.
   Note
   It will take about 10 seconds to shut down the output of REM OUT after the unit is turned off.
5. To a car's illumination signal
   Be sure to first connect the black ground (earth) lead to a common ground (earth) point.
6. To the parking brake switch lead The mounting position of the parking brake switch lead depends on your car. Be sure to connect the parking brake lead (light green) of the power supply leads to the parking brake switch lead.
   
7. To the +12 V power terminal of the car's rear lamp lead (only when connecting the rear view camera)

Memory hold connection
When the yellow power supply lead is connected, power will always be supplied to the memory circuit even when the ignition switch is turned off.

Speaker connection

• Before connecting the speakers, turn the unit off.
• Use speakers with an impedance of 4 Ω to 8 Ω, and with adequate power handling capacities to avoid damage.

Installing the microphone
To capture your voice during handsfree calling, you need to install the microphone .

• It is extremely dangerous if the cord becomes wound around the steering column or gearstick. Be sure to keep it and other parts from interfering with your driving operations.
• If airbags or any other shock-absorbing equipment are in your car, contact the store where you purchased this unit or the car dealer before installation.

Notes

• When mounting on the dashboard, remove the visor clip carefully from the microphone , then attach the flatmount base to the microphone .
• Before attaching the double-sided tape , clean the surface of the dashboard with a dry cloth.

Using the wired remote control
When using the steering wheel remote control
Installation of the connection cable RC-SR1 is required before use.

1. To enable the steering wheel remote control, select [General] [Steering Control] [Custom] to make the registration.
   When the registration is complete, the steering wheel remote control becomes available.

Notes on installing the connection cable RC-SR1

• Refer to the support site on the back cover for details then connect each lead properly to the appropriate leads. Making an improper connection may damage the unit.
• Consulting the dealer or an experienced technician for help is recommended.

When using the wired remote control

1. To enable the wired remote control, set [Steering Control] in [General] to [Preset].

Using the rear view camera
Installation of the rear view camera (not supplied) is required before use.
The picture from a rear view camera connected to the CAMERA IN terminal is displayed when:

• the back lamp of your car lights up (or the shift lever is set to the R (reverse) position).
• you press HOME, then touch [Rear Camera].

Installation

To install the unit and the display securely, be sure to follow the steps to in order.

1. Before mounting the unit
2. Mounting the unit in the dashboard
3. Attaching the joint cover
4. Setting up the display
5. Making sure the mounting positions of the display
6. Organizing the USB cable
7. Attaching the display to the unit

For your safety
After mounting the display to the unit, make sure that the display does not interfere with normal driving operations such as blocking the driver's view or getting the cables tangled.

Before mounting the unit

Before mounting the unit in the dashboard, arrange the USB extension cables

USB cable connection diagram

1. Remove the cable cover, store the USB extension cable (short) to the groove of the unit, then attach the cable cover.
   Position the USB cable so that its connector (male) comes to the front side of the unit.
   * USB connector (male)
   
2. Route the USB extension cable (long) inside the dashboard, then connect the USB cable (short) from the unit.
   Position the USB cable so that its connector (male) comes out from the center console panel.
   * USB connector (male)
   

Mounting the unit in the dashboard

Using the mounting brackets supplied with your car
You may not be able to install this unit in some makes of Japanese cars. In such a case, consult your Sony dealer.
Example

Note
To prevent malfunction, install only with the mounting screws .

Attaching the joint cover

1. 1 Attach the joint cover to the mounting base of the unit, then slide it into the unit temporarily.
   

Setting up the display

The mounting positions of the display can be adjusted.

Adjusting the depth of the display position

1. Loosen the 3 pre-installed screws for depth adjustment (on top and both sides).
   Slightly loosen the screws until you can slide the connector bracket. Do not remove the screws from the bracket. Doing so may damage the parts.
   
2. Slide the connector bracket to decide the appropriate depth position.
   Adjustable depth: within 20 mm (13/16 in) (), in 3 steps, in 10 mm (13/32 in) pitch ().
   
   Bracket positions 1 to 3 for the display:
   1. Slide-out position
   2. Intermediate position
   3. Slide-in position
3. At the desired position, tighten the 3 screws firmly to secure the connector bracket.
   
   Tighten the screws firmly. When you tighten a screw, be careful not to apply too much torque as doing so may damage the screw (the torque value should be less than 1.5 N•m).

Adjusting the height of the display position

1. Remove the 4 pre-installed screws for height adjustment (on both sides).
   
2. Slide the connector bracket up or down to decide the appropriate height position.
   Adjustable height: within 60 mm (2 3/8 in) (), in 7 steps, in 10 mm (13/32 in) pitch ().
   
3. At the desired position, tighten the 4 screws firmly to secure the connector bracket.
   
   Tighten the screws firmly. When you tighten a screw, be careful not to apply too much torque as doing so may damage the screw (the torque value should be less than 1.5 N•m).

Adjusting the display angle (tilt)

1. Remove the 2 pre-installed screws for angle adjustment (on both sides).
   
2. Adjust the display angle to decide the appropriate angle.
   Adjustable angle: -10° to +10°, in 3 steps
   
   Screw holes to use:
   
3. At the desired angle, tighten the 2 screws through the screw holes (upper or lower) that match the display angle.
   
   Tighten the screws firmly. When you tighten a screw, be careful not to apply too much torque as doing so may damage the screw (the torque value should be less than 1.5 N•m).

Making sure the mounting positions of the display

Be careful not to pinch your fingers or scratch the center cluster panel of your car when attaching the display to the unit.

1. Attach the display to the unit temporarily.
   
2. Confirm that the display does not block the driver's view or interfere with normal driving operations.
   If further adjustment of the mounting position (depth, height, angle) is necessary, remove the display from the unit, then adjust it again accordingly.

Organizing the USB cable

1. Connect the USB extension cable (short) to the USB port of the display, then route the cable along the groove.
   To prevent the extension cable from coming off, be sure to route the USB cable along the groove through the catches inside.
   

Attaching the display to the unit

Be careful not to pinch your fingers or scratch the center cluster panel of your car when attaching the display to the unit.

1. Attach the display to the unit.
   Make sure that the connector brackets of the display is fully inserted to the unit.
   
2. Tighten 4 screws (on top) to secure the connector bracket to the unit.
   Tighten the screws firmly. When you tighten a screw, be careful not to apply too much torque as doing so may damage the screw (the torque value should be less than 1.5 N•m).
   
3. Slide the joint cover out to protect the mounting base of the display, then tighten the fixing screw to secure the cover.
   Tighten the screw firmly.
   When you tighten a screw, be careful not to apply too much torque as doing so may damage the screw (the torque value should be less than 1.5 N•m).
   
4. Attach the rear panel covers (L, R) along the guides for protection.
   

Fuse replacement

When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer.

Warning

For safety, be sure to install this unit in the dashboard of the car as the rear side of the unit becomes hot during use. For details, see "Connection/Installation".
The nameplate indicating operating voltage, etc., is located on the bottom of the chassis.
The validity of the CE marking is restricted to only those countries where it is legally enforced, mainly in the countries EEA (European Economic Area) and Switzerland.

To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

If you have any questions about this product:
Visit: https://www.sony.com/electronics/support
Contact: Sony Customer Information Service Center at 1-800-222-7669
Write: Sony Customer Information Service Center
12451 Gateway Blvd., Fort Myers, FL 33913

For the State of California, USA only
Perchlorate Material – special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate

Do not ingest battery, Chemical Burn Hazard.
The remote commander contains a coin/ button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

Note on the lithium battery
Do not expose the battery to excessive heat such as direct sunlight, fire or the like.

if your car's ignition has no ACC position
Do not install this unit in a car that has no ACC position. The display of the unit does not turn off even after turning the ignition off, and this causes battery drain.

Disclaimer regarding services offered by third parties
Services offered by third parties may be changed, suspended, or terminated without prior notice. Sony does not bear any responsibility in these sorts of situations.

Important notice

IN NO EVENT SHALL SONY BE LIABLE FOR ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR OTHER DAMAGES INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF DATA, LOSS OF USE OF THE PRODUCT OR ANY ASSOCIATED EQUIPMENT, DOWNTIME, AND PURCHASER'S TIME RELATED TO OR ARISING OUT OF THE USE OF THIS PRODUCT, ITS HARDWARE AND/OR ITS SOFTWARE.
Dear customer, this product includes a radio transmitter.
Please check your vehicle operation manual or contact the manufacturer of your vehicle or your vehicle dealer, before you install this product into your vehicle.

Emergency calls
This BLUETOOTH car handsfree and the electronic device connected to the handsfree operate using radio signals, cellular, and landline networks as well as user-programmed function, which cannot guarantee connection under all conditions. Therefore do not rely solely upon any electronic device for essential communications (such as medical emergencies).

On BLUETOOTH communication

• Microwaves emitting from a BLUETOOTH device may affect the operation of electronic medical devices. Turn off this unit and other BLUETOOTH devices in the following locations, as it may cause an accident.
  • where inflammable gas is present, in a hospital, train, airplane, or petrol station
  • near automatic doors or a fire alarm
• This unit supports security capabilities that comply with the BLUETOOTH standard to provide a secure connection when the BLUETOOTH wireless technology is used, but security may not be enough depending on the setting. Be careful when communicating using BLUETOOTH wireless technology.
• We do not take any responsibility for the leakage of information during BLUETOOTH communication.
  If you have any questions or problems concerning your unit that are not covered in this manual, consult your nearest Sony dealer.