Rugged Ridge 11232.22 Manual

Contents:
1. Light Bar Lowering Kit
2. M12 x 30 Hex Bolts
3. M12 Standard Washers
4. M12 Nylon-Insert Hex Locknuts
NOTE: This part is only intended for use with Rugged Ridge
Full Frame Light Bar (Part No. 11232.21).
Please read and understand all instructions before proceeding
NOTICE
1. Attach the Light Bar Lowering Kit to the Light Bar
(11232.21) using the hex bolts, washers, and hex locknuts.
DO NOT TIGHTEN.
2. Push the brackets of the Light Bar Lowering
Kit until they are flush against the Full Frame
Light Bar. Tighten the hex bolts.
QTY
1
(1)
(3)
(3)
(3)
Page 1 of 2
11232.22 - Light Bar Lowering Kit
2
3
4