Martha Stewart TABITHA MT122-0145 Assembly Instructions

Important safety instructions:
Please read carefully all instructions before assembly.
For your safety and ease, assembly by two or more adults is recommended.
Keep instructions for future use.
Pre-assembly:
Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.
Take out all parts and hardware from box.
Parts List
Description
Item
Front Leg - R
P1
P2 Front Leg - L
P3 Back Leg
P4 Stretcher - Long
P5
Stretcher - Short
P6 Desk Top
Hardware List
Item
H1
Bolts ø1/4" x 2"
H2
Lock Washers 1/4"
H3 Flat Washers 1/4"
H4
Allen Wrench 1/4"
H5
Csk Screw M4 x 32mm
DISCLAIMER:
WHEN PROPERLY ASSEMBLED, THIS ITEM IS SAFE FOR INTENDED USE. SELLER IS NOT LIABLE FOR ANY DAMAGES
RESULTING FROM ITEM BEING IMPROPERLY ASSEMBLED AFTER PURCHASE.
Assembly Procedures:
Step 1. Assemble the Desk on a flat, soft surface such as a carpet or cloth to prevent scratching the finish.
Attach Legs (P1/P2/P3) to the Desk top (P6) using Bolt (H1) , Spring Washer (H2) , and Flat Washer (H3) secure
with allen wrench (H4) as shown below, but not fully tighten at this step.
ASSEMBLY INSTRUCTIONS
Description: TABITHA DESK
Description
QTY
1
1
2
1
2
1
QTY
8
8
8
1
6
Page 1 of 2