Martha Stewart Holls MT120-0091 Assembly Instructions

Console

Important safety instructions:

Please read carefully all instructions before assembling.

For your safety and ease, assembly by two or more adults is recommended.

Keep instructions for future use.

Do not discard any content until assembly completed to avoid accidentally discarding small parts or hardware.

Take out all parts and hardwares from box.

( H3)x2

Medium Bolt

∅

1/4"*1"L

Table of Contents

Do you have a question about the Holls MT120-0091 and is the answer not in the manual?

Page 1 Important safety instructions: Please read carefully all instructions before assembling. For your safety and ease, assembly by two or more adults is recommended. Keep instructions for future use. Pre-assembly: Do not discard any content until assembly completed to avoid accidentally discarding small parts or hardware. Take out all parts and hardwares from box.
Page 2 Step 2. Pull out the drawer from the drawer box completely (P5), then attach the drawer box (P5) to top panel (P1). See below image 2. ∅ ( H1)x4 Long Bolt 1/4"*1-1/4"L ( H4)x4 Lock Washer 1/4" ( H5)x4 Flat Washer 1/4" Step 3.
Page 3 Step 5. a) Remove the knobs (P6) from back of drawer front panel by unscrewing the bolts with screw driver (not provided) and then rea ttach to the drawer front by using bolts. See below image 5. b) To level console: If there is a gap between a leg and the floor , please adjust the adjustable leveler up or down which under each leg.