Martha Stewart Bleden Accent Chair Assembly Instructions

Important safety instructions:

Please read carefully all instructions before assembly.

For your safety and ease, assembly by two or more adults is recommended.

Keep instructions for future use.

Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware.

Take out all parts and hardware from box.

Table of Contents

Do you have a question about the Bleden Accent Chair and is the answer not in the manual?

Page 1 Important safety instructions: Please read carefully all instructions before assembly. For your safety and ease, assembly by two or more adults is recommended. Keep instructions for future use. Pre-assembly: Do not discard any content until assembly is complete to avoid accidentally discarding small parts or hardware. Take out all parts and hardware from box.
Page 2 Bolts Ø1/4"*3/4" (H1)X6 (H2)X6 (H3)X6 (H4)X1 Bolts Ø1/4"*3/4" (H1)X8 (H2)X8 (H3)X8 (H4)X1 Step 4. Screw the screw (H5) through the front rail (P6) and side rails (P7) to the legs (P2, P3, P4 &P5). Securely tighten all bolts . Turn the assembled chair to an upright position . Assembly is complete. Failure to follow these instructions may cause the bolts to misalign during assembly.

Mt100-0124