Table of Contents
Advertisement
Section - Troubleshooting
The following section describes how to troubleshoot the most common problems encountered with DXN-220.
1) The Coax LED does not illuminate when I connect my DXN-220 to coax wiring with at least one other
DXN-220 connected.
Confirm the DXN-220 is configured correctly. It is critical that the device is configured with the correct coaxial network
parameters in order for it to join the network and the switch is in the MoCA position.
If the DXN-220 network parameters are correct and the device still fails to form or join a DXN-220 network, then this
indicates that the room into which you were trying to install the device likely has impaired coaxial wiring.
Your options include:
• Do not use this room in the DXN-220 Ethernet-Coaxial network.
• Fix the coaxial wiring impairment yourself if the wiring is easily accessible. Contact a professional for
more difficult wiring installations.
• All cables must be securely fastened.
• Cables must be free of kinks and the outlet jack must not be pierced by fasteners.
• There should not be any active devices such as amplifiers in the wiring path leading to the target
room. If the amplifier must be installed for operation of television services in this target room then
please use amplifier-bypassing method described in previous section.
D-Link DXN-0 User Manual
Troubleshooting
Hide quick links:
Advertisement
Table of Contents
