Section - Configuration
Help
Help section allows user to view context specific DXN-220 help information and also to upgrade the DXN-220
firmware.
Firmware Upgrade
Firmware can be upgraded using "Firmware
Upgrade" option under the Help section. Firmware
should only be upgrade if you experience problems
with the bridge.
Click on "Firmware Upgrade" button to bring up the
firmware selection pop-up window. Click on "Browse"
button in the pop-up window and select the flash
image file to be programmed on the device. Click on
"Upgrade" button to begin the firmware update.
After a successful firmware upgrade, flip the
Configuration Switch to MoCA mode. The
DXN-220 will reboot itself with the new settings. The
reboot process will take roughly 45 to 60 seconds
to complete.
D-Link DXN-0 User Manual
1