Alphanumeric Display; Disposing Of The Pre - Cisco 10008 Hardware Installation Manual

Chapter 1 Cisco 10008 Router Overview
Table 1-3
LEDs/Switch
Status
Fail

Alphanumeric Display

The small alphanumeric display on the front panel provides information on the state of the PRE. The
display consists of two four-character LED panels.
explains what they mean. If you report a problem to Cisco, it is helpful to include the message on the
PRE's alphanumeric display in your problem report.
Table 1-4 Messages on PRE Alphanumeric Display
Message
1111, 2222, 3333, 4444, 5555, 6666, 7777,
8888, 9999
AAA, BBB, CCC
ROM DONE
AUTO BOOT
BOOT IMGE
IOS STRT, IOS EXC, IOS FPGA, IOS FPOK,
IOS FILE, IOS STBY, IOS INTF, IOS MEM,
IOS DRVR, IOS LIB, IOS MGMT, IOS PROT,
IOS CONF
– – – –
– – – –
IOS STBY

Disposing of the PRE

The PRE contains a small lithium battery. Some jurisdictions restrict the ways in which you may dispose
of items containing lithium batteries. In particular, never dispose of lithium batteries or products
containing lithium batteries in an unregulated fire. Other restrictions might apply in your area.
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Statement 1040
OL-0659-13
LEDs and Cutoff Switch
PRE Status
The PRE has just been powered on and is running its power-on self-test.
The PRE has loaded the ROM monitor. This message appears briefly if the
system is configured to boot a Cisco IOS software image. If the system is
not configured to boot Cisco IOS, this message remains on the display and
the rommon prompt appears on the terminal window.
The ROM monitor is preparing to boot a Cisco IOS image.
A Cisco IOS image is starting to boot.
These messages appear in quick succession during the boot process.
[On the primary PRE.] The PRE has finished booting and is running
Cisco IOS. This is the normal operating status for the primary PRE.
[On the secondary PRE.] The PRE is standing by; it is ready to take over if
the primary PRE fails. This is the normal operating status for the secondary
PRE.
Cisco 10008 Router Hardware Description
Status Description
Green PRE is ready.
Off No power to the PRE.
Off The PRE is operating properly.
Yellow A major failure has disabled the PRE.
Table 1-4 lists the most common messages and
Cisco 10008 Router Hardware Installation Guide
1-11