Cisco 10008 Hardware Installation Manual page 62

Connecting DC Power to the Cisco 10008 Router
Figure 3-18
Remove the safety cover by lifting it up and out from the chassis
Step 3
Figure 3-19
Strip not more than 0.4 inches (10 mm) of insulation off the ends of the DC power leads
Step 4
Cisco 10008 Router Hardware Installation Guide
3-20
Removing the Rear Cover
Stripping Insulation
10 mm max
Chapter 3 Installing the Cisco 10008 Router
(Figure 3-18).
(Figure 3-19).
OL-0659-13