Cisco 10008 Hardware Installation Manual page 140

Upgrading SDRAM on the PRE
Place the PRE on an antistatic mat or pad so that the DIMMs are facing up
Figure 5-51
1
1
Ejector tab
Remove each DIMM from its slot by pushing its ejector tabs out to the side and lifting the DIMM straight
Step 2
up (Figure
Figure 5-52
1 Key
Step 3 Remove a new DIMM from its antistatic bag
Cisco 10008 Router Hardware Installation Guide
5-48
Removing the DIMM
5-51).
Properly Handling a DIMM
1
Chapter 5
1
(Figure 5-52).
Maintaining the Cisco 10008 Router
(Figure 5-50).
OL-0659-13