Related Manuals for MICODUS ML920
Summarization of Contents
Main Features
4G LTE+2G GSM
Device supports 4G LTE and 2G GSM cellular networks.
Real-time Tracking
Enables continuous monitoring of the device's location.
Historical Route Playback
Allows reviewing past travel paths and routes.
Superstrong Magnetic
Features a powerful magnetic attachment for secure mounting.
Waterproof IP65
Protected against dust and low-pressure water jets.
Movement Alarm
Alerts when the device is moved from its position.
Voice Monitor
Allows remote listening to the device's surroundings.
Overspeed Alarm
Notifies when the device exceeds a set speed limit.
Vibration Alarm
Triggers an alert upon detecting vibration.
Geo-fence
Enables setting virtual boundaries for location alerts.
Teardown Alarm
Activates an alert if the device is tampered with or removed.
Specifications
Device Information
Details on model, weight, and dimensions of the tracker.
Working Parameters
Information on battery life under different operational modes.
Cellular Specifications
Technical details regarding cellular connectivity and frequency bands.
GNSS Specifications
Information on GPS, GLONASS, BDS, and accuracy.
Activate Device
First Step: Prepare And Install Sim Card
Instructions for preparing and inserting the SIM card.
LED Indicators
Explanation of LED status lights for device operation.
Configure APN
Guide to setting up APN for cellular data connection.
Functions Explanation
Voice Monitor
Set up a center number for remote voice monitoring.
Set Working Mode
Configure different operational modes like tracking, power saving, and hibernation.
Vibration Alarm
Set up center numbers and contact details for vibration alerts.
Full SMS Commands List
Query Commands
Commands for retrieving device status and information.
Parameter Inquiry
Commands to query device parameters like APN, IP, and mode.
Status Inquiry
Commands to check the current status of the device.
Alarms Parameters
Commands to query alarm settings and status.
Latitude& Longitude Inquiry
Command to get current location data.
Map URL Inquiry
Command to get a Google Maps URL for the device's location.
Setting Commands
APN Setting
Configure Access Point Name settings for network connection.
Server Setting
Configure server IP address or domain name for data transmission.
Restore factory settings
Reset the device to its original factory default settings.
Restart device
Command to reboot the device.
Internet Traffic Switch
Enable or disable internet data traffic.
Set the angle upload
Configure parameters for uploading data based on angle changes.
Time Zone Setting
Set the device's local time zone for accurate logging.
Mileage Statistics
Commands to manage and query mileage data.
Sleep Mode Setting
Configure the device to enter sleep mode when stationary.
Add SOS Administrator Number
Set up to three SOS contact numbers for administrator alerts.
Delete SOS Administrator Number
Remove previously set SOS administrator contact numbers.
Add Center Number
Set authorized center numbers for device control.
Delete Center Number
Remove authorized center numbers from the device.
Set the instruction password
Enable or disable the password for sending commands.
Change the instruction password
Modify the existing password for sending commands.
Reset password
Reset the device password to its default or a new ID.
Data Upload Time Zone Setting
Configure time zone for accurate data upload timestamps.
Change IMEI
Update the device's International Mobile Equipment Identity number.
Voice Monitor
Command to initiate voice monitoring via a center number.
Working Mode Setting
Tracking Mode
Device uploads GPS data at set intervals when moving or static.
Power Saving Mode
Device enters power saving mode at a specified time and uploads hourly.
Hibernation Mode
Device enters hibernation mode and uploads hourly, wakeable by light sensor.
Heartbeat Packet Upload
Configures periodic heartbeat data transmission to maintain network connection.
Sensor Sensitivity
Adjust the sensitivity level for vibration or motion detection.
LED Switch
Control the status of the device's LED indicators.
Alarm Setting Commands
Vibration Alarm Setting
Enable/disable vibration alarm and set notification methods.
Overspeed Alarm Setting
Configure overspeed limit and choose alarm notification methods.
Shift Alarm Setting
Set distance-based shift alarms and notification methods.
Low Battery Alarm Setting
Enable/disable low battery alerts and set notification methods.
Need help?
Do you have a question about the ML920 and is the answer not in the manual?
Questions and answers