Connecting An Av Receiver Or Amplifier - Pioneer BDP-09FD - Elite Blu-Ray Disc Player Operating Instructions Manual

Connecting an AV receiver or
amplifier
Connect to an AV receiver or amplifier in order to enjoy the surround
sound of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD
Master Audio, DTS-HD High Resolution Audio or DTS Digital
Surround. For instructions on connecting the TV and speakers to the
AV receiver or amplifier, refer to the operating instructions of AV
receiver or amplifier.
Caution
• Hold the plug when connecting and disconnecting the cable.
• Placing a load on the plug could result in faulty contact and no
video signals being output.
• To use the KURO LINK function, connect the AV receiver or
amplifier to the HDMI OUT (MAIN) terminal. The KURO LINK
function will not work if connected to the HDMI OUT (SUB)
terminal.
• The HDMI OUT (SUB) terminal outputs linear PCM 2-channel
audio signals. Be sure to connect the AV receiver or amplifier to
the HDMI OUT (MAIN) terminal.
Player's rear panel
AUDIO OUT ( 7.1 ch )
FRONT SUB WOOFER CENTER
R L R
CONTROL LAN(100) DIGITAL OUT
IN HDMI OUT
OPTICAL COAXIAL
MAIN(KURO LINK)
Match the direction of
the plug to the terminal
and insert straight.
AV receiver
or amplifier
To HDMI input terminal
From HDMI output terminal
To HDMI input terminal
TV
SURROUND SURROUND
L R L
BACK
VIDEO OUT
S-VIDEO VIDEO
RS-232 C
COMPONENT VIDEO
SUB P R P B Y
HDMI OUT
MAIN(KURO LINK) SUB
To HDMI input
terminal
Projector
Direction of
signal flow
Note
• When DTS-HD Master Audio and DTS-HD High Resolution
Audio signals are output as linear PCM signals, the DTS Digital
Surround signals are converted to linear PCM for output
(page 54).
• See Stretching widescreen pictures vertically (Anamorphic Zoom)
on page 52 for instructions on viewing 2.35:1 movies with a front
projector equipped with an anamorphic lens.
 Achieving better sound quality
When connecting one TV (or projector) and AV amplifier to the
player, connect in such a way that the video and audio signals are
transferred separately in order to achieve higher quality sound.
Note
• Using the Pure Audio function provides high quality sound with
extraneous noise eliminated (page 53).
FRONT SUB WOOFER
R L
CONTROL LAN(100) DIGITAL OUT
IN
OPTICAL COAXIAL
Match the direction of
the plug to the terminal
and insert straight.
P
R
Direction of
signal flow
AV receiver
or amplifier
Do not connect using
an HDMI cable.
Player's rear panel
AUDIO OUT ( 7.1 ch )
CENTER SURROUND SURROUND
R L R L
BACK
VIDEO OUT
VIDEO
S-VIDEO
RS-232 C
COMPONENT VIDEO
HDMI OUT
MAIN(KURO LINK) SUB P R P B Y
HDMI OUT
MAIN(KURO LINK) SUB
To HDMI input To HDMI input
terminal
terminal
02
P
R
TV or
projector
17
En