Getting Started; Making Settings Using The Setup Navigator Menu - Pioneer BDP-09FD - Elite Blu-Ray Disc Player Operating Instructions Manual

Chapter 3

Getting Started

Making settings using the
Setup Navigator menu
Be sure to perform these settings when using the player for the first
time.
Caution
• Before turning on the power, check that the connections
between the player and other devices are correct. Also, turn on
the power of the devices connected to the player before turning
on the player's power.
1 Turn on the TV's power and switch the input.
See the TV's operating instructions for instructions on operating the
TV.
If TV Control is set, the TV can be operated with the player's remote
control (page 23).
2 Turn on the player's power.
Press  STANDBY/ON.
STANDBY/ON
TV CONTROL
INPUT
SELECT
Check that the Setup Navigator menu is displayed.
 If the Setup Navigator menu is not
displayed
 Press
HOME MENU to display the Home Menu, select
Initial Setup  Setup Navigator  Start, then press ENTER.
3 Select the OSD language.
Use / to select, then press ENTER.
TOP MENU
HOME
MENU
Setup Navigator
BD PLAYER
Please select the on-screen display language.
Audio, subtitle and BDMV/DVD-Video menu
language will also be set.
OPEN/CLOSE
CH VOL
TOOLS
ENTER
RETURN
When a Pioneer Flat Panel TV that is compatible with KURO LINK is
connected to this player's HDMI OUT (MAIN) terminal, language
settings are imported from the Pioneer Flat Panel TV's language
settings before Setup Navigator begins.
4 Select and set the video and audio output terminals.
Select the actually connected video and audio output terminals.
Use /// to select, then press ENTER.
TOP MENU
HOME
MENU
Setup Navigator
BD PLAYER
Select the output terminals to be used for
the video and audio signals of this player.
Video
Audio
Use [ ][ ] to select video or audio, then
press [ ][ ] to select the output terminal.
Setting item Output terminal name
HDMI MAIN HDMI OUT (MAIN)
HDMI SUB HDMI OUT (SUB)
COMPONENT/S/ VIDEO OUT
VIDEO
HDMI MAIN HDMI OUT (MAIN)
DIGITAL AUDIO DIGITAL OUT
ANALOG AUDIO AUDIO OUT (7.1 ch)
Caution
• The video and audio signals output from the set output terminals
are output synchronously (lip synchronization).
• When HDMI MAIN or DIGITAL AUDIO is selected at Audio,
linear PCM audio signals (2 channels) are output from all
terminals other than the ones selected at Audio.
• When ANALOG AUDIO is selected at Audio, no audio signals
are output from the HDMI OUT or DIGITAL OUT terminals.
• The HDMI OUT (SUB) terminal outputs linear PCM 2-channel
audio signals. HDMI SUB cannot be selected for Audio. To
listen to the device connected to the HDMI OUT (SUB) terminal,
select HDMI MAIN.
TOOLS
ENTER
RETURN
HDMI MAIN
HDMI MAIN
COMPONENT VIDEO
S-VIDEO
VIDEO
COAXIAL
OPTICAL
03
21
En