Kuro Link; Others - Pioneer BDP-09FD - Elite Blu-Ray Disc Player Operating Instructions Manual

KURO LINK

Problem Check
KURO LINK function does • Is the HDMI cable properly connected?
not work.
• Are you connected to the HDMI OUT (SUB) terminal?
Is the HDMI cable you are using a High Speed HDMI™ cable? Use a High Speed HDMI™ cable. The KURO LINK function
Is KURO LINK set to On on the player?
Does the connected device support the KURO LINK function? • The KURO LINK function will not work with devices
Is KURO LINK set to On on the connected device?
Are multiple players connected?

Others

Problem Check
The player's power turns off Is Auto Power Off set to On?
automatically.
The player's power turns on Is KURO LINK set to On?
or off automatically.
Player cannot be operated Is an AV receiver or amplifier connected to the CONTROL IN
with remote control. terminal on the player's rear panel?
Are you operating the remote control from a point too far away
from the player?
Are the batteries dead?
Input of connected TV and AV Is KURO LINK set to On?
system switches
automatically.
Remedy
To use the KURO LINK function, connect the Flat Panel TV and
AV system (AV receiver or amplifier, etc.) to the HDMI OUT
(MAIN) terminal (page 16).
may not work properly if HDMI cable other than a High Speed
HDMI™ cable is used.
Set KURO LINK to On on the player (page 45).
manufactured by companies other than Pioneer, even when
connected using an HDMI cable.
• The KURO LINK function will not work if devices that do not
support the KURO LINK function or devices manufactured by
companies other than Pioneer are connected between the
KURO LINK-compatible device and the player.
• Even when connected to a Pioneer product compatible with
the KURO LINK function, some of the functions may not work.
Also refer to the operating instructions of the connected
device.
Set KURO LINK to On on the connected device. The KURO
LINK function operates when KURO LINK is set to On for all
devices connected to the HDMI OUT (MAIN) terminal.
Once connections and settings of all the devices are finished,
be sure to check that the player's picture is output to the Flat
Panel TV. (Also check after changing the connected devices
and connecting and/or disconnecting HDMI cables.) If the
player's picture is not being output to the Flat Panel TV, the
KURO LINK function may not work properly.
For details, refer to the operating instructions of the connected
device.
The KURO LINK function may not work if three or more players,
including this player, are connected by HDMI cable.
Remedy
If Auto Power Off is set to On, the player's power turns off
automatically if no operation is performed for over 30 minutes
(page 46).
The player's power may turn on and off together with the power
of the TV connected to the HDMI OUT (MAIN) terminal. If you
do not want the player's power to turn on and off when the TV's
power is turned on and off, set KURO LINK to Off (page 45).
Operate with the remote control of the device connected to the
CONTROL IN terminal.
Operate from within 23 feet of the remote control sensor.
Replace the batteries (page 7).
The input of the TV and AV system (AV receiver or amplifier,
etc.) connected to the HDMI OUT (MAIN) terminal may
automatically switch to the player when playback starts on the
player or the menu screen (Home Media Gallery, etc.) is
displayed. If you do not want the inputs of the connected TV
and AV system (AV receiver or amplifier, etc.) to switch
automatically, set KURO LINK to Off (page 45).
07
69
En