Network Connection; Connecting Via An Ethernet Hub; Connecting The Power Cord - Pioneer BDP-09FD - Elite Blu-Ray Disc Player Operating Instructions Manual

Network connection

02
The player's software can be updated over the Internet (page 52).
Connect an Ethernet hub (or a router with hub functionality) that is
connected to the Internet to the player.
Be sure to use a 100BASE-TX compatible Ethernet hub or router.

Connecting via an Ethernet hub

If you already operate one or more PCs on a local area network, you
can integrate this player by connecting it to the Ethernet hub using
a LAN cable.
FRONT SUB WOOFER
R L
LAN(100) DIGITAL OUT
CONTROL
IN
OPTICAL COAXIAL
LAN(100)
CONTROL
IN
3 2
LAN
LAN(10/100)
PC
Note
• If there is an available DHCP server in your local area network,
the IP address is obtained automatically. Otherwise, set IP
address manually (page 50).
• For some Internet service providers, you may have to set the
individual network configuration manually. In this case, see
page 50.
• Pioneer is not responsible for any malfunction of the player due
to communication error/ malfunctions associated with your
network connection and/or your connected equipment. Please
contact your Internet service provider or network device
manufacturer.
20
En
Player's rear panel
AUDIO OUT ( 7.1 ch )
CENTER SURROUND SURROUND
R L R L
BACK
VIDEO OUT
VIDEO
S-VIDEO
RS-232 C
COMPONENT VIDEO
HDMI OUT
MAIN(KURO LINK) SUB P R P B Y
DIGITAL OUT
OPTICAL COAXIAL
LAN cable (included)
Ethernet hub
1
WAN
(router with hub functionality)
Internet
Modem

Connecting the power
cord
Connect the power cord after all the connections between devices
have been completed.
Player's rear panel
FRONT SUB WOOFER CENTER AUDIO OUT ( 7.1 ch ) SURROUND SURROUND
L L
R R R
BACK
VIDEO OUT
S-VIDEO
RS-232 C
CONTROL LAN(100) DIGITAL OUT COMPONENT VIDEO
IN
HDMI OUT
OPTICAL COAXIAL P P
MAIN(KURO LINK) SUB R B
URROUND
L
BACK
OUT
VIDEO
L
VIDEO
Y
Power cord (included)
To wall outlet