Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for KERN AXE
Summarization of Contents
Introduction
General notes on these instructions
Provides general information and notes relevant to the operating instructions.
Presentation conventions
Explains the conventions used for text and symbols within the manual.
Device overview
Components
Identifies and describes the physical parts of the KERN AXS/AXE analytical balance.
Basic information (general)
Intended use
Defines the proper and intended application of the analytical balance.
Improper use
Details prohibited uses of the scale and associated risks and damages.
Guarantee
Lists the conditions under which the manufacturer's warranty for the scale will expire.
Test equipment monitoring
Explains the requirement for regular monitoring and calibration of the scale and test weights.
Basic safety instructions
Observe the notes in the operating instructions
Stresses the importance of carefully reading and following all operating instructions.
Staff training
States that only trained personnel are permitted to operate and maintain the appliance.
Transport and storage
Control on takeover
Guidelines for inspecting the packaging and scale for damage upon delivery.
Packaging/return transport
Instructions for proper packaging of the scale for transport or return.
Unpacking, installation and commissioning
Installation site, place of use
Advice on selecting an appropriate location for the scale to ensure accurate measurements.
Unpacking and checking
Steps for safely unpacking the scale and verifying the completeness of the delivery.
Assembly, installation and levelling
Procedures for assembling and correctly levelling the analytical balance.
Mains connection
Instructions for safely and correctly connecting the scale to the power supply.
Connection of peripheral devices
Guidance on connecting external devices such as printers or PCs to the scale.
Initial commissioning
Steps required for the initial setup and warm-up period of the scale.
Adjustment
Explains the importance and procedure for adjusting the scale to local conditions for accuracy.
Basic operation
Switch on/off
Detailed instructions on how to power the scale on and off.
Simple weighing
A step-by-step guide on how to perform a basic weighing procedure.
Zeros
How to zero the scale to ensure accurate weight measurements.
Taring
Instructions for using the taring function to remove the weight of a container.
Application
PEAK HOLD function
Guide on utilizing the Peak Hold feature to capture and display maximum weight values.
Application
Application-specific settings
Explains how to configure specific settings for the percentage weighing application.
Menu
Navigation in the menu
Instructions on how to navigate through the scale's menu structure.
Overview Menu
Provides a comprehensive overview of the available menu options and their functions.
Communication with peripheral devices
RS232C interface
Details the RS232C interface for connecting external devices.
Technical data
Technical specifications related to the scale's communication interfaces.
Output functions
Describes the various data output functions available from the scale.
Maintenance, servicing, disposal
Cleaning
Instructions for cleaning the analytical balance safely and effectively.
Maintenance, servicing
Information regarding maintenance and servicing procedures for the scale.
Waste disposal
Guidelines for the proper disposal of the scale and its packaging.
Need help?
Do you have a question about the AXE and is the answer not in the manual?
Questions and answers