Advertisement
Pressure Systems with
Installation and Operating
NOTE: Prior to installation remove the inlet and outlet
pipe transport plugs & associated seals from the
suction and/or discharge ports.
WARNING : The Torrium2 controller, pump and associated pipework operate
under pressure. Under no circumstances should the Torrium2 controller,
pump or associated pipework be disassembled unless the internal pressure
of the unit has been relieved. Failure to observe this warning will expose
persons to the possibility of personal injury and may also result in damage
to the pump, pipework or other property.
WARNING: Failure to follow these instructions and comply with all applicable
codes may cause serious bodily injury and/or property damage.
Please pass these instructions on to the operator of this equipment.
Davey BIT Series
Instructions
Advertisement
Table of Contents
Need help?
Do you have a question about the BIT14-45 and is the answer not in the manual?
Questions and answers