Table of Contents
Advertisement
Quick Links
Repair
GrindLazer
For removal of materials from flat horizontal concrete and asphalt surfaces. For
professional use only.
Model 25M992 - Forward Cut
GrindLazer HP DC89 G (270 cc / 9 hp)
Model 25M993 - Forward Cut
GrindLazer HP DC1013 G (390 cc / 13 hp)
Model 25M994 - Reverse Up-Cut (Must be used with LineDriver™)
GrindLazer HP DC1021 G (627 cc / 21 hp Electric Start)
Model 25N658 - Forward Cut
GrindLazer HP DC1013 G DCS (390 cc / 13 hp Electric Start)
Model 25N659 - Reverse Up-Cut (Must be used with LineDriver™)
GrindLazer HP DC1021 G DCS (627 cc / 21 hp Electric Start)
IMPORTANT SAFETY INSTRUCTIONS
Read all warnings and instructions in this manual and in the Operation and Parts Manuals before using
the equipment. Be familiar with the controls and the proper usage of the equipment. Save all instructions.
25M992 / 25M993
™
25M994
(Drums, cutters, and LineDriver
www.graco.com/techsupport
LineDriver Operation - 312540
LineDriver ES Operation, Repair, Parts - 3A6623
25N658
™
sold separately)
3A5919C
EN
Related Manuals:
Repair - 3A5919
Parts - 3A5929
25N659
Advertisement
Table of Contents
Related Manuals for Graco GrindLazer HP DC1013 G
Summarization of Contents
Warnings
General Safety Warnings
Covers hazards like dust, rotating parts, burns, misuse, and required PPE.
Additional Safety Warnings
Fire and Explosion Hazards
Discusses risks related to flammable fumes and ignition sources in the work area.
Carbon Monoxide Hazard
Warns about the dangers of poisonous carbon monoxide gas from exhaust.
Battery Hazard
Details hazards associated with lead-acid batteries, including gases and acid.
California Proposition 65
States chemicals known to cause cancer, birth defects, or reproductive harm.
Component Identification
Non-DCS Models
Identifies key components for models without DCS using diagrams and labels.
Drum Replacement
Drum Removal
Step-by-step instructions for safely removing the cutting drum from the unit.
Drum Installation
Guides on how to install a new cutting drum, including orientation notes.
Cutter Replacement (Diamond Blades)
Diamond Blade Cutter Removal
Steps to remove diamond blades, including using a spanner wrench.
Diamond Blade Cutter Installation
Procedures for installing diamond blades and spacers correctly.
Belt Replacement
Belt Removal
Instructions on how to remove the drive belt from the unit.
Clutch Replacement
Clutch Removal
Steps to remove the clutch assembly from the machine.
Clutch Installation
Procedures for installing a new clutch assembly.
Pulley Replacement
Pulley Removal
Steps for removing the pulley assembly.
Pulley Installation
Instructions for installing a new pulley assembly.
Brush Replacement
Brush Removal
Steps to remove the existing brush.
Brush Installation
Instructions for installing a new brush.
Drive Bearing Assembly Replacement
Door Bearing Assembly
Covers removal and installation of the door bearing assembly.
Troubleshooting
General Troubleshooting
Addresses common engine and operational issues with solutions.
Wiring Diagram
DCS System Wiring
Illustrates the electrical connections for the DCS system.
Technical Data
GrindLazer HP DC89 G (Model 25M992) Specifications
Provides specifications like dimensions, noise, vibration, and power for the 25M992 model.
GrindLazer HP DC1013 (Model 25M993) Specifications
Lists specifications for the 25M993 model, including dimensions and power.
Need help?
Do you have a question about the GrindLazer HP DC1013 G and is the answer not in the manual?
Questions and answers