Related Manuals for Truper 16289
Summarization of Contents
Assembly
Assembly and belt adjustment
Details the process of assembling the planer and adjusting belt tension for optimal operation.
Adjustments
Adjust the table rollers
Adjusts the height of the table rollers to the desired position for planing different wood types.
Adjust the blades
Details the process for adjusting the cutting cylinder blades for precise and clean cuts.
Table and Cutter Head Alignment
Explains how to align the worktable parallel to the cutter head for accurate planing.
Cutter Head Component Adjustments
Details factory adjustments for feed roller, chip shredder, and expulsion roller heights.
Adjustment of feed and expulsion rollers
Describes how to adjust the tension of the feed and expulsion rollers for consistent material feeding.
Operation
Starting and operation control
Covers how to start, stop, and control the planer's operation using its controls.
Feeding the work piece
Explains the correct procedure for feeding material into the planer for safe and effective planing.
Getting a good finish
Provides tips for achieving a fine finish when planing wood, including cut depth and grain direction.
Maintenance
Cleaning
Instructions for cleaning the cutter head, mechanisms, and table surface to ensure performance.
Lubrication
Details lubrication intervals and types of oil for various machine parts.
Gearbox lubrication
Specific instructions for changing the gearbox lubricant after extended use.
Need help?
Do you have a question about the 16289 and is the answer not in the manual?
Questions and answers