Advertisement
Quick Links
Instructivo de
Cepillo de piso
NOTA IMPORTANTE: Este producto no debe quedar
expuesto a goteo o salpicaduras por líquidos.
Este instructivo es para:
Código
Modelo
16293
CEP-20
CEP-20
ATENCIÓN
Lea este Instructivo por completo
antes de usar el cepillo
51 cm
20"
Capacidad máxima de cepillado
Advertisement
Related Manuals for Truper 16293
Summarization of Contents
General Safety Instructions
Work Area and Electrical Safety
General safety rules for the work environment and electrical precautions.
Safe Operation and Maintenance
Guidelines for safe machine operation, storage, and basic maintenance.
Personal Protective Equipment (PPE)
Requirements for wearing safety glasses, dust masks, and hearing protection.
Technical Specifications
Technical Data
Power, frequency, current, and motor performance specifications.
Cutting Capacity and Speed
Maximum material dimensions, planing depth, and feed speeds.
Cutterhead and Roller Details
Specifications for the cutterhead, blades, and table rollers.
Additional Safety Rules for the Planer
Familiarization and Blade Maintenance
Rules for learning operation and maintaining sharp blades.
Safe Handling and Operation
Guidelines for safe material handling and machine operation.
PPE and Dust Control
Recommendations for personal protective equipment and dust management.
Planer Description and Components
Unpacking and Initial Cleaning
Procedures for inspecting the carton and cleaning the planer.
Key Component Identification
Labeled diagram identifying main parts of the planer.
Lifting and Lubrication Procedures
Lifting Handles and Planer Lifting
Location and use of lifting handles for safe machine movement.
Lubrication Guide
Schedule and types of lubricants for various machine parts.
Gearbox Lubrication Details
Specific instructions for changing gearbox lubricant.
Motor and Belt Assembly
Motor Pulley and Belt Installation
Steps for mounting the motor pulley and installing belts.
Motor and Belt Alignment
Procedure for aligning motor and cutterhead pulleys.
Belt Tension Adjustment
Method for adjusting belt tension for optimal operation.
Table Roller Adjustment
Table Roller Function and Adjustment
Guidance on setting table roller height based on material type.
Table Extension Assembly and Adjustment
Mounting the Table Extension
Instructions for attaching the table extension to the main table.
Adjusting Table Extension Alignment
Procedure for ensuring the extension is level with the table.
Depth of Cut Control
Using the Depth Scale and Handwheel
How to set and adjust the cutting depth using the scale and wheel.
Locknut Adjustment for Table Movement
Procedure for loosening and tightening locknuts for table height adjustment.
General Adjustments and Blade Verification
Pre-Operation Adjustment Checks
Verifying factory settings and checking for shipping inaccuracies.
Checking and Adjusting Cutting Blades
Inspecting and adjusting the cutterhead blades for proper performance.
Blade Replacement and Readjustment
Blade Removal Procedure
Steps for safely removing cutting blades for sharpening or replacement.
Blade Installation and Setting
Process for reinstalling and setting blades using a gauge.
Worktable and Cutterhead Parallelism
Checking Table-Cutterhead Parallelism
Method for verifying if the table is parallel to the cutterhead.
Adjusting Table Parallelism
Procedure for correcting table parallelism if misaligned.
Parallelism Adjustment and Drive Rollers
Fine-Tuning Table-Cutterhead Alignment
Detailed steps for adjusting table parallelism.
Drive Roller Information
Explanation of the function and types of drive rollers.
Feed Roller Adjustments and Safety Features
Adjusting Feed/Ejector Roller Spring Tension
How to adjust the spring tension for feed and ejector rollers.
Anti-Kickback Nail Functionality
Description and inspection of anti-kickback nails for safety.
Verifying Component Height Adjustments
Checking and adjusting the height of feed rollers, bar, and crusher.
Feed Speed Control and Dust Collection
Feed Roller Speed Settings
Adjusting feed speed via gearbox and handle positions.
Return Rollers Functionality
Explanation of the purpose and operation of return rollers.
Dust Collector Hood Accessory
Information on the standard dust collector accessory.
Authorized Service Centers
Locating a Truper Service Center
Instructions for finding authorized service locations online or by phone.
Truper Warranty Policy
Warranty Coverage and Claims
Details on the 1-year warranty, claim procedures, and required documents.
Customer Support Contact
Contact information for warranty inquiries and product support.
Need help?
Do you have a question about the 16293 and is the answer not in the manual?
Questions and answers