Tangent CDP-200 Instruction Manual page 6

IMPORTANT SAFETY INSTRUCTIONS
Lightning
Unplug the unit for additional protection during thunder or
when the unit is not used for prolonged periods. This will
prevent damage to the unit from lightning and power surges.
Penetration of objects and liquid
Never push any foreign objects through the openings into the
unit, as they may touch dangerous voltage points or short-
circuit parts and thus cause fire or electric shock. Do not spill
liquid on the unit.
Accessories
Do not place the unit on unstable surfaces such as a trolley,
stand, tripod, shelf or table. The unit may fall and injure
children or adults or be seriously damaged. Use only trolley,
stand, tripod, shelf or table that is very stable or provided with
the unit. The unit must be installed in accordance with the
manufacturer's instructions and by means of installation
equipment recommended by the manufacturer. If the unit is
placed on a trolley, the trolley must be moved very carefully.
Sudden stops, unnecessary force and uneven surfaces may
cause the trolley to turn over.
Loads
Do not place heavy loads on the unit and do not step on it.
The load may fall and cause serious injury to persons or
damage to the unit.
Damage
Unplug the unit and contact qualified technicians in the
following cases:
A) If the power cord or the plug is damaged.
B) If liquid has been spilled on the unit or objects have fallen
into the unit.
C) If the unit has been exposed to rain or water.
D) If the unit does not work properly after adhering to the
instructions in the operation manual. Only the settings
described in the operation manual must be made as
incorrect setting may result in damage and often will make
it difficult for a qualified technician to make the unit work
properly again.
E) If the unit has been dropped or damaged in any other way.
F) When the operation of the unit changes drastically, the unit
requires service.
Service
Do not attempt to carry out any service work yourself. By
opening or removing the cabinet, you will be exposed to
dangerous voltage or other hazards. Any service work should
be carried out by qualified technicians.
Spare parts
If spare parts are required, make sure that the service
technician uses spare parts specified by the manufacturer or
spare parts with the same characteristics as the original.
Unauthorised spare parts may cause fire, electrical shock, etc.
Safety check
After service or repairs on the unit, ask the service technician
to carry out a safety check to ensure that the unit is ready for
use.
06