TYAN TSUNAMI AT Manual page 17

Chapter 2
Board Installation
best system available. To make installation easy and trouble free, get high
quality parts. Some brands we recommend are Advantage Memory, Corsair
Microsystems, Millenium, Kingston Memory, QesTec Incorporated, Unigen,
Micron Technology, and Crucial Technology. These DIMMs have proven to
be very stable on our boards and perform extremely well.
To install your DIMMs, line your module up so that the pins fit into the slot.
There is only one way that your DIMM can fit properly. Make sure that the
short row of pins is lined up with the short gap in the DIMM slot. Figure 10
important!
shows how to sit the DIMM into its slot. To insert the DIMM, push down
vertically on the module with even force, as shown in the photo. Do not shove
one end in first; doing so will bend the DIMM pins.
To lock the DIMM into place, push the plastic clips on either end of the slot
onto the notches in the ends of the DIMM (see Figure 11 on the following
page). To remove your DIMM, simply pull the clips back, and pull up on the
module.
Place the DIMMs in an anti-static bag as soon as you remove them to avoid
static damage.
Finally, install your CPU.
Pentium II processors (233 through 400MHz) can be used on the Tsunami AT.
Please refer to pages 27-29 for the correct CPU jumper settings for your board.
Figure 10
18
http://www.tyan.com