Table of Contents
Advertisement
Trinity i875P S5101
POST (hex)
37h:
Test DMA Channel 1.
39h:
Test DMA page registers.
3Ch:
Test 8254
3Eh:
Test 8259 interrupt mask bits for channel 1.
40h:
Test 8259 interrupt mask bits for channel 2.
43h:
Test 8259 functionality.
47h:
Initialize EISA slot
49h:
1. Calculate total memory by testing the last double word of each 64K
page.
2. Program write allocation for AMD K5 CPU.
4Eh:
1. Program MTRR of M1 CPU
2. Initialize L2 cache for P6 class CPU & program CPU with proper
cacheable range.
3. Initialize the APIC for P6 class CPU.
4. On MP platform, adjust the cacheable range to smaller one in case the
cacheable ranges between each CPU are not identical.
50h:
Initialize USB Keyboard & Mouse.
52h:
Test all memory (clear all extended memory to 0)
53h:
Clear password according to H/W jumper (Optional)
55h:
Display number of processors (multi-processor platform)
57h:
1. Display PnP logo
2. Early ISA PnP initialization
-Assign CSN to every ISA PnP device.
59h:
Initialize the combined Trend Anti-Virus code.
5Bh:
(Optional Feature)
Show message for entering AWDFLASH.EXE from FDD (optional)
5Dh:
1. Initialize Init_Onboard_Super_IO
2. Initialize Init_Onbaord_AUDIO.
60h:
Okay to enter Setup utility; i.e. not until this POST stage can users enter
the CMOS setup utility.
63h:
Reset keyboard if Early_Reset_KB is not defined.
65h:
Initialize PS/2 Mouse
Appendix II: Post Error Code for BIOS
Description
6-9
http://www.tyan.com
Hide quick links:
Advertisement
Table of Contents
