TYAN TRINITY I875P User Manual page 25

Trinity i875P S5101 Chapter 2: Board Installation
Serial ATA
Attaching Serial ATA cables to the Serial ATA connectors is illustrated below:
Se rial ATA Hard drive
Serial ATA Cable
Serial ATA Connector
Serial ATA Cable
Power Cable
Simply plug in the BLACK END of the Serial ATA cable into the motherboard Serial ATA
connector, and the other end(s) into the drive(s). Each standard Serial ATA cable has two
connectors. Both BLACK ENDS of the Serial ATA cable are the same that are used to connect
to drives or motherboard.
2-20
http://www.tyan.com