Power Management Setup; Irq/Event Activity Detect; Irqs Activity Monitoring - TYAN TRINITY 510 Manual

3.9 Power Management Setup

Options related to power management can be altered through the following.
ACPI function
ACPI Suspend Type
Power Management
Option
HDD Power Down
Suspend Mode
Video Off Option
Video Off Method
Soft-Off by PWRBTN
PWRON After PWR-Fail
IEQ/Event Activity Detect

3.10 IRQ/Event Activity Detect

Options related to IRQ events can be altered through the following.
VGA
LPT & COM
HDD & FDD
PCI Master
PowerOn by PCI Card
Modem Ring Resume
RTC Alarm Resume

IRQs Activity Monitoring

3.11 IRQs Activity Monitoring
Leave all settings as they are.
Enabled
Disabled
S1 (POS)
User Define
Maximum Saving
Minimum Saving
Disabled
1,5,10,20,30,45,60 minutes
Disabled
Standby
Sleep
Suspend -> Off
Standby
V/H SYNC+Blank
Blank
Off
Instant-Off
4-seconds
Off
On
Press Enter
Off
On
LPT/COM
LPT
COM
On
Off
On
Off
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Press Enter
25
http://www.TYAN.com
Toggles advanced power
and configuration done by
OS.
Defines ACPI system
suspend mode.
Defines the type of power
saving features the system
should follow.
Defines hard drive power
down delay.
Defines the method used to
power off the system.
Defines the method used to
power off video.
Defines the method used to
power off graphics.
Defines the action of the
power button when
pressed.
Defines whether the
system will remain off if
power fails or turn on when
power is restored.
Defines whether the device
will remain active if system
enters Suspend mode.
Defines whether the
system can be powered on
by a PCI Card.
Defines whether the
system will wake up if the
modem is dialed into.
Defines the time/date when
the system will wake up.
Leave all settings as is.