TYAN TRINITY 510 Manual page 22

3.3 Advanced CMOS Features
Options related to the IO interface can be altered through the following.
Virus Warning
CPU L1 & L2 Cache
CPU L2 Cache ECC
Checking
Quick Power On Self Test
First, Second, Third, Other
Boot Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Typematic Rate Setting
Typematic Rate
(chars/Sec)
Typematic Delay (MSec)
Security Option
OS Select for DRAM >
64MB
Small Logo(EPA) Show
3.4 Advanced Chipset Features
Options related to the chipset features can be altered through the following.
DRAM Clock/Drive Control
AGP & P2P Bridge Control
CPU & PCI Bus Control
CPU IOQ Size
System BIOS cacheable
Video RAM Cacheable
Delay Prioir to Thermal
Disabled
Auto
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Options Dependant on
system.
Enabled
Disabled
Enabled
Disabled
On
Off
Enabled
Disabled
6 , 8, 10, 12, 15, 20, 24, 30
250 , 500, 750, 1000
Setup
System
Non-OS2
OS2
Enabled
Disabled
Press Enter
Press Enter
Press Enter
1 Level
Disabled
Enabled
Enabled
Disabled
16 Min
22
http://www.TYAN.com
This settings toggles virus
protection on or off for boot
sector writes.
Toggles the use of CPU L1
and L2 cache
Toggles the use of error
correction with L2 cache
This option allows the
system to skip self tests for
faster startup.
Selects the startup device
sequence.
This option switches A: to
B: drive.
This option causes the
floppy drives to be
detected at startup.
Sets the Num Lock on or
off.
Toggles control of
keyboard key repeat rate.
Defines how many
characters are repeated
per second.
Defines the delay that
occurs at key stroke before
that key will start to repeat.
Sets the password on
either just the BIOS setup
or the entire system (BIOS
setup included).
Select OS2 only if you are
running OS/2 operating
system with more than
64MB of RAM.
Toggles the display of the
EPA Energy Star logo at
POST.
Leave all settings as is.
Leave all settings as is.
Leave all settings as is.
Leave this setting as is.
This option enables BIOS
to be cached to RAM.
This option enables video
RAM to be cached to RAM.
Leave this setting as is.