TYAN TOMCAT I7230B Manual page 64

Resume On Time
When enabled, this allows the system to be worked up at a specified time. This
time is specified by the Resume Time parameter.
Off / On
Resume Time
This option allows the user to specify the time when the system is to wake up.
Power Button Behavior
This specifies the behavior of the system after the power button is pressed.
On/Off - This powers on / powers off the system after the power button is
pressed.
Wake/Sleep - This wakes the system from/puts the system to sleep.
After Power Failure
Specifies the mode of operation after the system recovers from a power loss.
Enabled: This restores the system to the last state it was in before the
power loss occurred.
Chassis Intrusion Detect
This feature is used to enable/disable the function: when chassis open event is
detected, BIOS will record the event.
Disabled / Enabled
S5 Wake-Up by PCI Card
If enabled, this option awakens the system from the S5 (power-off) state with an
input signal from PME on the PCI card,
Enabled / Disabled
64
http://www.tyan.com