TYAN TOMCAT I7230B Manual page 6

System Management
•SMSC SCH5017 and EMC6D103
with hardware monitoring
•One (1) 3+1-pin CPU fan headers
with tachometer monitoring and
smart FAN control (by SCH5017)
•Five (5) 3+1-pin system fan
headers with tachometer
monitoring, three (3) of them
support smart FAN control
•Temperature and voltage
monitoring
•Watchdog timer support
•Port 80 code display lED
Integrated I/O
•One floppy connector
•One IDE connector
•Four SATA ports
•Six USB 2.0 ports (2 at rear, 4 via
cable)
•Two COM port (1 at rear, 1 via
cable)
•Tyan 2x9 front-panel pin header
•Tyan 2x6 front-panel pin header
for LAN LED and ID LED/Switch
•2x25 connector for optional Tyan
IPMI SMDC
Back Panel I/O Ports
•Stacked PS/2 mouse & keyboard
ports
•Stacked 2 USB ports & 1 RJ45
10/100 ports
•One 9-pin COM port
•One 15-pin VGA port
•Two side-by-side RJ-45
10/100/1000 ports
Optional Modules
•M3291, IPMI 2.0 Remote System
Management card
-Renesas H8S2167 BMC
controller
- BT, KCS, logging support
- IPMI-over-LAN
- Remote power on/off and reset
•M7901/M7902, Ultra320 SCSI
"TARO" card
-Adaptec AIC-7901/7902
single/dual-channel Ultra320
SCSI controller
- Adaptec HostRAID 0,1,10
supported
•M9000 SAS/SATA II "TARO" card
-Adaptec AIC-9405/9410 SAS
controller
- Supports up to 4-port (M9000-5)
and 8-port (M9000-10) SAS &
SATA running at 3.0Gb/s
- Adaptec HostRAID 0,1 & 10
supported
BIOS
•Phoenix BIOS on 8Mbit Flash
ROM
•Serial Console Redirect
•USB boot supported
•Supports APM1.2 and ACPI
•PnP, DMI2.0, WfM2.0
•S0/S1/S4/S5 states supported
Power Supply
•EPS12V
•24-pin + 8-pin power connectors
Form Factor
•ATX footprint
•12" x 9.6" (305mm x244mm)
Regulatory
•FCC Class B (DoC)
•European Community CE (DoC)
•BSMI
6
http://www.tyan.com