Related Manuals for yellow jacket 67073
Summary of Contents for yellow jacket 67073
- Page 1 User Manual YJACK PRESS ® Pressure Gauge Bluetooth Sensing Technology ® RevA 2024 8-13...
-
Page 2: Table Of Contents
Q: How do I know that my YJACK PRESS® is turned off? .................... 8 Q: How do I zero the readings on my YJACK PRESS®? ....................8 Q: Why are the YJACK PRESS® devices not showing up on my TITANMAX™ or P51-870 TITAN®? ......8 Spare Parts ..................................9 69026 Replacement Battery door .......................... -
Page 3: Yjack® Tools Getting Started
YJACK® devices. The YJACK PRESS® products include a status indication LED adjacent to the power button which can provide feedback as to the device’s current mode of operation. During normal operation, the status indicator LED will flash yellow once every two seconds to indicate that a measurement has been transmitted via Bluetooth®. -
Page 4: Safety And Warning Information
Using Your YJACK® Devices Powering the Device On The YJACK PRESS® device utilizes a same power switch and a status indicator LED. Press and hold the power button to power on the device. Release the power button when the status indicator LED illuminates. -
Page 5: Yjack Press® Wireless Pressure Gauge
YJACK PRESS® Wireless Pressure Gauge When powering on the YJACK PRESS® Wireless Pressure Gauge, hold the power button until the status indicator LED illuminates solid yellow, then release the power button. Once powered on, the LED will flash every time the YJACK® devices readings are broadcast, every 2 seconds. When the battery level reaches 10%, the LED will flash red to indicate the low battery condition. -
Page 6: General Settings
Psychrometric System Efficiency and Leak Test sessions and communication capabilities with YJACK PRESS®, YJACK VAC®, YJACK AMP® YJACK® Temp Clamps and Straps, YJACK MANO® and YJACK FLOW®. Easily place and monitor status of all YJACK®, TITANMAX™ and P51-870 TITAN® devices from one screen. Data log formatting allows for multiple devices with multiple sampling intervals. -
Page 7: Pressure/Temperature Session
You can select from Pressure/Temperature, Psychrometric Air Calculations, Evacuation, Static Pressure, or Available Devices to return to the Available Devices screen. When using the YJACK PRESS®, your device can be selected for standalone readings in the datalog selection or in the Pressure/ Temperature session. -
Page 8: Create Data Log
Create Data log Data logs can be created to log readings during any session. To start a data log from within any session, press on the gear icon in the upper right corner of the screen and select “Create Datalog.” From this screen you can select the logging rate, which is how frequently the readings will be logged, and which session type to log readings from. -
Page 9: Troubleshooting & Faqs
*Caution, only zero devices that are not connected to the system as pressurized systems will not zero properly. Q: Why are the YJACK PRESS® devices not showing up on my TITANMAX™ or P51-870 TITAN®? A: Only devices required for providing data to the sessions on the TITANMAX™ and P51-870 TITAN® will be displayed in the “available devices”... -
Page 10: Spare Parts
Spare Parts 69026 Replacement Battery door 19020 Replacement Gaskets for ¼”(10 pack) 93394 ¼” Cap with Tether 19062 Schrader Fitting with brass fitting, the valve core, and cap (same cap as 93394) 40272 Schrader fitting 19062, but without cap 18976 Valve Cores 6-pack 19305 Valve Cores 10-pack...
Need help?
Do you have a question about the 67073 and is the answer not in the manual?
Questions and answers