Table of Contents
Advertisement
Quick Links
Warranty Information
Ritchie Engineering guarantees
YELLOW JACKET products to be free
of defective material and workmanship
which could affect the life of the product
when used for the purpose for which it
was designed. Warranty does not cover
items that have been altered, abused or
returned solely in need of field service
maintenance. If found defective, we will
either replace or repair at our option
products returned within 15 months of
factory shipment. All returns must be
return freight prepaid.
Printed in U.S.A.
The following steps must be taken by
you or your wholesaler before the unit
can be returned:
1. Call our technical service personnel
at (800)769-8370 to see if the prob-
lem can be resolved over the phone.
2. Obtain an RMA number from
Ritchie Engineering.
3. Fax a copy of the original invoice to
(952)943-1140.
If at any time after the warranty period
you have problems with your YELLOW
JACKET recovery unit, call our
technical service department for help in
selecting the correct replacement parts,
or arrange for us to make the repair at a
reasonable cost.
Ritchie Engineering
YELLOW JACKET Products Division
10950 Hampshire Avenue South
Bloomington, MN 55438 USA
Phone: 952-943-1333
Phone: 800-769-8370
Fax:
952-943-1605
e-mail: custserv@yellowjacket.com
Web Site: www.yellowjacket.com
Part #151053_D
™
RecoverX
Oil-Filled Hermetic
Refrigerant Recovery System
Operation and Maintenance
Manual
Advertisement
Table of Contents
Related Manuals for yellow jacket RecoverX
Summary of Contents for yellow jacket RecoverX
- Page 1 Warranty Information Ritchie Engineering guarantees The following steps must be taken by YELLOW JACKET products to be free you or your wholesaler before the unit of defective material and workmanship can be returned: which could affect the life of the product 1.
- Page 2 Prior to shipment, all YELLOW for handling and settling your claim. allow refrigerants to contact open the atmosphere. There is a YELLOW JACKET RecoverX Recovery Systems Ritchie Engineering will cooperate in flame. Refrigerant decomposition in JACKET hose for almost every type of...
- Page 3 15) Caution: To avoid overfilling the 11) Use the RecoverX only with the refrigerant cylinder, read and follow correct refrigerants. (See specifica- the manufacturer’s recommended tions for a complete list of compatible filling instructions for the refrigerant refrigerants.)
-
Page 4: Troubleshooting Guide
7. Other Refrigerants: Restart Procedure YELLOW JACKET RecoverX is approved for use with the following refrigerants which If the recovery unit was stopped during Open “Bypass Valve”. • has not been certified for a particular recovery rate. - Page 5 This will help this manual. assure the fastest and quickest recovery possible. 4) Protect your RecoverX by using an in-line filter drier. Failure to use a 2) Know what kind of refrigerant you suction filter drier can cause damage Push-Pull Liquid Recovery are going to recover and the amount.
- Page 6 Push-Pull Liquid Recovery, cont. Change-over Procedure, cont. 9) Close the low pressure gage on the 6) Turn the Bypass Valve to “CLOSED.” 9) Run the vacuum pump for at least Check the compressor oil for con- manifold set. 10 minutes to remove the remaining tamination and proper level.
Need help?
Do you have a question about the RecoverX and is the answer not in the manual?
Questions and answers